Kent Moore Tools J-42854 | Trim Height Measurement Gauge

Y Trim height must be Set to correct specifications to assure proper Alignment and vehicle handling characteristics. Affix End of Tool with magnet to lower Ball Joint. Align Tool so bubble in level site is centered. Tool will be parallel to shop floor. Position metric scale on Front or Rear Control Armattachment Bolt. Site along top of the Bar to deTermine trim height Setting. Verify measurement with shop manual specifications. Trim height must be measured at both Front and Rear.

Kent Moore Tools - J-42854 - Product Categories

• Automotive Specialty Tools
• Drive Train- Transmission
• Gauges

Kent Moore Tools - J-42854 - Features

• Kent-Moore Tools J-42854 Trim Height Gauge for GM. Y Trim height must be set to correct specifications to assure proper alignment and vehicle handling characteristics. Affix end of tool with magnet to lower ball joint. Align tool so bubble in level site is centered. Tool will be parallel to shop floor. Position metric scale on front or rear control arm attachment bolt. Site along top of the bar to determine trim height setting. Verify measurement with shop manual specifications. Trim height must be measured at both front and rear.

Kent-Moore Tools - J-42854 - Specifications

Brand Name	Kent-Moore Tools
Manufacturer Part Number	J-42854
Item Description	Trim Height Measurement Gauge

Kent Moore Tools - J-42854 - Partial List of Applications

Front : Chassis : Corvette	1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Front : Chassis : H3	2006, 2007, 2008, 2009, 2010
Front : Chassis : H3/H3T	2009
Front : Suspension : Corvette	1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Front : Suspension : H3	2006, 2007, 2008, 2009, 2010
Front : Suspension : H3/H3T	2009
Front : Suspension : XLR	2004, 2005, 2006
General : Suspension : Corvette	2000, 2001, 2002, 2003, 2004, 2005, 2006, 2003, 2004, 2005, 2006
General : Suspension : H3	2006, 2006
General : Suspension : H3/H3T	2009
General : Suspension : XLR	2004, 2005, 2006
Rear : Suspension : Corvette	1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Rear : Suspension : H3	2006, 2007
Rear : Suspension : H3/H3T	2009
Rear : Suspension : XLR	2004, 2006
Suspension General Diagnosis : Suspension : Corvette	1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2013, 2014, 2016, 2017
Suspension General Diagnosis : Suspension : H3	2006, 2007, 2008, 2009, 2010
Suspension General Diagnosis : Suspension : H3/H3T	2009
Suspension : Suspension : Corvette	2011, 2012
wheel Alignment : Suspension : H3	2006, 2007, 2008, 2009, 2010
wheel Alignment : Suspension : H3/H3T	2009

Kent Moore Tools - J-42854 - Other Kent Moore products

J-43890 - T-Harness Adapter	Click to View
DT-47678-A - Service Fixture (Use With J-03289-20 Or J-39890)	Click to View
KM-460-B - Removing Tool	Click to View
DT-52739 - Transfer Case Lift Adapter	Click to View
CH-51210 - Valve,Tank Venting	Click to View
J-45398 - Forward Clutch Inner Seal Remover	Click to View
J-45057-2 - Lower Engine Support Bar	Click to View
EN-49977-100 - Fixation Sensor Discs	Click to View
EN-52613 - Holding Tool, Flywheel	Click to View
EL-51102-50 - Battery Pack Lift Straps (Quantity 4)	Click to View