Kent Moore Tools DT-47678-A | Transmission Assembly Fixture

Applications:?Cadillac CTS, ATS; Chevrolet Camaro, Colorado; GMC Canyon with Aisin, Tremec or Eaton manual Transmission.

?ervice of the Eaton 6-Speed manual Transmission requires access to the Front and Rear of the Transmission at the same time for several procedures, and the unit is disassembled and reassembled in a vertical position.?Existing service Fixture DT-47678 for Aisin and Tremec manual Transmissions fits around the Transmission Body, but does not Line up with the bell Housing pattern.?Chevrolet or GMC-Cadillac dealers who already have DT-47678 can modify their existing Fixture using DT-47678-20 temPlate, which can be downLoaded from the Tool website.?DT-47678-A holds the Transmission around it center of gravity and mounts into existing J-03289-20 bench mounts, allowing full service access to all Parts of the Transmission.?DT-47678-A allows Repair to be done with the Transmission horizontal or vertical, as directed by SI.

Kent Moore Tools - DT-47678-A - Product Categories

• Automotive Specialty Tools
• Auto Air Conditioning Tools
• Service Tools

Kent Moore Tools - DT-47678-A - Features

• For GM / General Motors. DT-47678-A Service Fixture is used with DT-47678-10 Adapters to service Tremec transmissions, and by itself to service Aisin units. Unit repair on these transmissions must be done with the transmission vertical, especially snap ring removal and installation. If the unit is not held upright, components can bind, not allowing other components to seat properly, and making assembly very difficult. DT-47678-A mounts the transmission to J-03289-20 Bench Mount, and allows full service on the unit.

Kent-Moore Tools - DT-47678-A - Specifications

Brand Name	Kent-Moore Tools
Manufacturer Part Number	DT-47678-A
Item Description	Transmission Assembly Fixture

Kent Moore Tools - DT-47678-A - Partial List of Applications

Manual Transmission - Tremec 6-Speed (M13 MJK MM6) : Transmission : Camaro	2017
Manual Transmission - Tremec 6-Speed (MM6 M13) : Transmission : Camaro	2016

Kent Moore Tools - DT-47678-A - Other Kent Moore products

KM-460-B - Removing Tool	Click to View
DT-52739 - Transfer Case Lift Adapter	Click to View
CH-51210 - Valve,Tank Venting	Click to View
J-45398 - Forward Clutch Inner Seal Remover	Click to View
J-45057-2 - Lower Engine Support Bar	Click to View
EN-49977-100 - Fixation Sensor Discs	Click to View
EN-52613 - Holding Tool, Flywheel	Click to View
EL-51102-50 - Battery Pack Lift Straps (Quantity 4)	Click to View
J-44646 - Valve Spring Compressor - On Car	Click to View
J-43768 - Installer, Turbine Tone Wheel	Click to View