Kent Moore Tools GE-52200-A | Propulsion System Lift

Application: 2019-later Cadillac XT4 2.0L-T LSY Engine; 2017 Bolt EV battery Pack: 2020-later Chevrolet Blazer 2.0L-T LSY Engine; 2020-later GMC Acadia 2.0L-T LSY Engine; all FWD-Based vehicles where Engine and Transmission Removal is from under the vehicle. The GE-52200-A Propulsion System Lift allows Removal and Installation of Powertrains and Engines/Transmissions separately, as well as Fuel Tanks, suspensions, cradles and EV / PHEV batteries. The Service Top features a 60/40 split table allowing Powertrains to be separated while mounted to the table. In addition to Supporting vehicle components during service operations, GE-52200-A will lower to a 21.50-in. height to provide an ideal work bench surface to allow service on those components safely. Max lift height: 70?(177.8 cm) Min lift height: 21.5?(54.6 cm) Load capacity: 1,760 lb. (800 kg)

Kent Moore Tools - GE-52200-A - Product Categories

• Lifting Equipment
• Engine Cranes & Stands

Kent Moore Tools - GE-52200-A - Features

• Application: 2019 Cadillac XT4 CSS LSY Engine and 2017 Bolt EV
• The GE-52200-A Propulsion System Lift allows removal and installation of powertrains and engines/transmissions separately, as well as fuel tanks, suspensions, cradles, and EV / PHEV batteries.
• The Service Top features a 60/40 split table allowing powertrains to be separated while mounted to the table.
• In addition to supporting vehicle components during service operations, GE-52200-A will lower to a 21.50-in. height to provide an ideal work bench surface to allow service on those components safely.
• Max lift height: 70 (177.8 cm)
• Min lift height: 21.5 (54.6 cm)
• Load capacity: 1,760 lb. (800 kg)

Kent-Moore Tools - GE-52200-A - Specifications

Brand Name	Kent-Moore Tools
Manufacturer Part Number	GE-52200-A
Item Description	Propulsion System Lift

Kent Moore Tools - GE-52200-A - Partial List of Applications

Battery Pack : Electric Vehicle (EV) : Bolt	2017
Engine : XT4 CSS LSY : Cadillac	2019
Hybrid/EV Energy Storage : Engine/Propulsion : Bolt EV	2017

Kent Moore Tools - GE-52200-A - Other Kent Moore products

EN-46091-25 - Diesel Engine Pressure Test Adapter	Click to View
KM-232 - Adapter	Click to View
KM-652 - Auto Transmission FlexPlate Holder	Click to View
DT-51834 - Ptu Seal Installer (Rh Input & Pinion Cassette)	Click to View
DT-52263-5 - Drain Adapter, 3/8?Hose	Click to View
DT-52088 - Turbine Shaft Seal Sizer	Click to View
J-41230-TEM - Trans Fixture Drill TemPlate	Click to View
J-45268-7 - Fitting	Click to View
J-43268-A - Guide Bridge Installer	Click to View
J-46626 - Manual Shaft Seal Installer	Click to View