Applications: 2017 XT5, Acadia; 2018 Traverse, Enclave w/AWD (PTU service)The two dual-lip type Input Shaft Seals are Installed to specific positions in the case and cover. The IDS Output and Rear Pinion Output Seals are both a two-piece Cassette design. The Cassette Seals must be Installed so the Inner and Outer halves are positioned correctly (relative to each other) to function as designed and to prevent Seal damage. All of the PTU Seals are different sizes. DT-51834 is designed for double-Ended/dual usage to Install the Rear Pinion Cassette Seal into the Rear Housing and also to Install the RH Input Seal into the Right Side cover. To Install the two-piece Rear Pinion Seal to the proper position, DT-51834 has an internal counter-Bore to allow clearance of the Pinion Shaft and also a raised area/face to position the Seal correctly. Incorrect Seal Installation will result in less than desired Seal performance and decreased Seal life.
Partial List of Applications
| Power Transfer Unit - GKN 761 : Transmission : Acadia | 2017 |
| Power Transfer Unit - GKN 761 : Transmission : XT5 | 2017 |
Other Kent Moore products
| DT-52263-5 - Drain Adapter, 3/8” Hose | Click to View |
| DT-52088 - Turbine Shaft Seal Sizer | Click to View |
| J-41230-TEM - Trans Fixture Drill TemPlate | Click to View |
| J-45268-7 - Fitting | Click to View |
| J-43268-A - Guide Bridge Installer | Click to View |
| J-46626 - Manual Shaft Seal Installer | Click to View |
| EN-52668 - Fan Clutch Nut Wrench | Click to View |
| DT-51977 - Fdu Pinion Seal Installer | Click to View |
| EL-52100-1 - Mdi2 Dlc Cable | Click to View |
| EN-51007-4 - Clamp Assembly | Click to View |
