Application: Chevrolet EquinoxDrive Shafts on upcoming AWD vehicles are Retained by a Retaining Clip inSide the spLines, which Locks onto the PTU or RDM spLined Shaft. In order to overcome the Retaining Ring, a large force must be applied against it suddenly. Current retention force of the PTU is 350-450N with possibility of increasing in the future. Attempts to pry the Drive Shaft off the PTU or RDM will damage the Drive Shaft. To prevent damage to the Drive Shaft, DT-51329-A fits the groove provided on Equinox, Terrain, XT5, Acadia, and Envision prop Shafts, and is used with previously Essential J-02619-A Slide Hammer to unseat the snap Ring. DT-51329-A attaches around the propShaft, and its two halves are tightened together to seat DT-51329-A into the groove. The Slide Hammer is then attached, and used to remove the propShaft. The Removal force is 2000-6000N @ 50mm/min. Unapproved methods will damage the prop Shaft.
Kent Moore Tools - DT-51329-A - Product Categories
- Automotive Specialty Tools
- Auto Air Conditioning Tools
- Adapters-Couplers- Fittings-Gask
Kent Moore Tools - DT-51329-A - Features
- Driveshafts on upcoming AWD vehicles are retained by a retaining clip inside the splines, which locks onto the PTU or RDM splined shaft. In order to overcome the retaining ring, a large force must be applied against it suddenly. Current retention force of the PTU is 350-450N with possibility of increasing in the future. Attempts to pry the driveshaft off the PTU or RDM will damage the driveshaft. To prevent damage to the driveshaft, DT-51329-A fits the groove provided on Equinox, Terrain, XT5, Acadia, and Envision prop shafts, and is used with previously Essential J-02619-A slide hammer to unseat the snap ring. DT-51329-A attaches around the propshaft, and its two halves are tightened together to seat DT-51329-A into the groove. The slide hammer is then attached and used to remove the propshaft. The removal force is 2000-6000N @ 50mm/min. Unapproved methods will damage the prop shaft.
- Application: Chevrolet Equinox
Kent-Moore Tools - DT-51329-A - Specifications
| Brand Name | Kent-Moore Tools |
| Manufacturer Part Number | DT-51329-A |
| Item Description | Driveshaft Removal Adapter |
Kent Moore Tools - DT-51329-A - Partial List of Applications
| Propeller Shaft : Driveline /Axle : Acadia | 2017 |
| Propeller Shaft : Driveline /Axle : XT5 | 2017 |
Kent Moore Tools - DT-51329-A - Other Kent Moore products
| J-46621 - Piston Seal Protector | Click to View |
| KM-727 - Remover | Click to View |
| CH-52707 - Installer/Remover, Bushing (1.35" O.D.) | Click to View |
| J-45711 - Side Bearing Remover | Click to View |
| CH-47976-517 - Afit G8 Adapter Harness | Click to View |
| J-45108 - Plate, Gauge | Click to View |
| EL-51578 - M.O.S.T. 50 Test kit | Click to View |
| J-44227 - Rear Seal Installer | Click to View |
| J-44714-1B - Bearing Remover Assembly | Click to View |
| J-45703 - Inner Bearing Race Remover | Click to View |
