Kent Moore Tools DT-50871 | Pinion Seal Installer

The Pinion Seal on the 218 mm RDM has a Sealant applied around its OD, and the Output Shaft Seal on the 195 mm RDM is a larger diameter than current GM Seals. This Sealant requires higher Installation force than previous Seals. DT-50871 is a steel Seal Installer instead of plastic, due to the force required to Drive the Seal into the RDM Carrier. Plastic Seal Installers will not deliver the Installation force required to seat the Pinion Seal, and DT-50871 was originally developed for the Camaro HP 250 RDM, which has a very high Installation force, requiring a metal Seal Installer. DT-50871 fits both Alpha RDMs, and Installs both the 218 Pinion and 195 Output Seals. Used with J-22828 Installer.

Kent Moore Tools - DT-50871 - Product Categories

• Automotive Specialty Tools
• Drive Train- Transmission
• Seal Removal & Installation

Kent Moore Tools - DT-50871 - Features

• The Kent-Moore DT-50871 Pinion Seal Installer is a tool designed to install pinion seals on the 218 mm RDM and output seals on the 195 mm RDM. It is made of steel instead of plastic to provide the necessary force For proper installation. The pinion seal on the 218 mm RDM has sealant applied around its outer diameter, which requires a higher installation force. The larger diameter of the output shaft seal on the 195 mm RDM also requires a stronger installation force.
• The DT-50871 was originally developed For the Camaro HP 250 RDM, which has a particularly high installation force.
• This tool is compatible with both Alpha RDMs and should be used with the J-22828 InstallerApplications:
• Rear Drive Axle : Driveline/Axle : ATS : 2013
• Rear Drive Axle : Driveline/Axle : ATS : 2014
• Rear Drive Axle : Driveline/Axle : Camaro : 2013
• Rear Drive Axle : Driveline/Axle : Camaro : 2014
• Rear Drive Axle : Driveline/Axle : CTS : 2014
• Rear Drive Axle : Driveline/Axle : Escalade : 2015
• Rear Drive Axle : Driveline/Axle : Sierra : 2014
• Rear Drive Axle : Driveline/Axle : Sierra : 2015
• Rear Drive Axle : Driveline/Axle : Silverado : 2014
• Rear Drive Axle : Driveline/Axle : Silverado : 2015
• Rear Drive Axle : Driveline/Axle : Suburban : 2015
• Rear Drive Axle : Driveline/Axle : Tahoe : 2015
• Rear Drive Axle : Driveline/Axle : Yukon : 2015
• Manufacturer: SPX/Bosch (OTC Rotunda Kent-Moore Miller)

Kent-Moore Tools - DT-50871 - Specifications

Brand Name	Kent-Moore Tools
Manufacturer Part Number	DT-50871
Item Description	Pinion Seal Installer

Kent Moore Tools - DT-50871 - Partial List of Applications

Rear Drive Axle : Driveline /Axle : ATS	2013, 2014, 2016, 2017
Rear Drive Axle : Driveline /Axle : Camaro	2013, 2014
Rear Drive Axle : Driveline /Axle : Canyon	2016, 2017
Rear Drive Axle : Driveline /Axle : Cheyenne	2016, 2017
Rear Drive Axle : Driveline /Axle : Colorado	2016, 2017
Rear Drive Axle : Driveline /Axle : CTS	2014, 2016, 2017
Rear Drive Axle : Driveline /Axle : Escalade ESV	2016, 2017
Rear Drive Axle : Driveline /Axle : Escalade	2015, 2016, 2017
Rear Drive Axle : Driveline /Axle : Sierra	2014, 2015, 2016, 2017
Rear Drive Axle : Driveline /Axle : Silverado	2014, 2015, 2016, 2017
Rear Drive Axle : Driveline /Axle : Suburban	2015, 2016, 2017
Rear Drive Axle : Driveline /Axle : Tahoe	2015, 2016, 2017
Rear Drive Axle : Driveline /Axle : Yukon XL	2016, 2017
Rear Drive Axle : Driveline /Axle : Yukon	2015, 2016, 2017

Kent Moore Tools - DT-50871 - Other Kent Moore products

J-38297-A - Counter Shaft Gear remover	Click to View
J-23479-33 - Collet	Click to View
EN-48974-20 - Adapter Set, Egr Cooler Tester	Click to View
J-23479-29 - Collet	Click to View
EN-49245-4 - Engine Control Seal Sizer	Click to View
J-37378-1 - Intake Valve Guide Reamer	Click to View
J-38125-605 - Tray, Connector Parts	Click to View
EN-47649-100 - Feet, Special Engine Bridge	Click to View
J-42168-1 - Gauge Cylinder	Click to View
J-04670-A - Clutch Spring Compressor	Click to View