Kent-Moore GE-52250 | Variable Pressure Leak Detector
GE-52250 is used to detect Leak sources in the induction System, the Engine, or in the exhaust and Turbo System. CAUTION: GE-52250 operates at higher Pressure than currently requires J41413-A Evap System Tester, and must NOT be used for Evap System diagnosis, or damage to Evap components will occur.Helpful hintsCan be used with 12v DC or 120v AC – selectable by using the switch on the back of the unitMust be connected to compressed Air for smoke flowThe Pressure Control knob must be pulled out to adjust Pressure, and may need to be turned several rotations for adjustment to show on the Gauge
Other Kent Moore products
| DT-48616-1 - Test Plate | Click to View |
| DT-50914 - Remover/Installer Solenoid Valve Retainer | Click to View |
| EN-50031 - Valve Spring Compressor Adapter | Click to View |
| EN-51768 - Engine Support Fixture Adapters (M8 Bolts) | Click to View |
| J-44586 - P/S Seal Remover / Installer | Click to View |
| J-45688 - Center Support Piston Installer | Click to View |
| EL-52010 - Transmission Extension Harness | Click to View |
| EN-52511 - FA-AFM OCV Remover | Click to View |
| DT-51617 - Output Shaft Seal Installer | Click to View |
| J-44419 - Hub Bearing Installer | Click to View |
