Price match guarantee
We know our products
Quick & Hassle Free
Extensive product catalog
Reelcraft offers a chemical resistant fluid path as an option for our most popular models series. The reels include a Stainless Steel path and swivel (components in contact with the fluid) that provide maximum protection for corrosive fluid applications. Standard swivel seals include Buna, though EPR and FKM are also available depending on compatibility requirements (consult Technical Services for assistance). Reels are typically shipped without hose as fluid compatibility must be confirmed.
Reel is shipped in the top wind position. The reel image is shown in the side wind position.
Adding wraps of hose will increase spring tension. This can be accomplished by pulling out approximately 10 feet of hose, hand feed hose back up through roller bracket assembly until loop is large enough to slip over sheave. Add two or three wraps until desired tension is achieved. Do not exceed spring capacity.’
This can be accomplished by removing wraps of hose from the reel sheave. Remove wraps of hose from the sheave, one wrap at a time, until desired tension is obtained.
For Series D9000 reels, you will have to remove the bumper and control handle then feed the end of the hose through the roller bracket assembly to add or remove wraps of hose from the reel drum.
While most Reelcraft spring retractable reels can be made “constant tension” at the factory or by simply removing the latching system there are some models that may not have this capability.
Please contact Reelcraft Customer Service to assure that the specific reel you have or require is capable of or available as a “constant tension” model.
