Reelcraft HD78005OLB | 1/2 in. x 75 ft. Heavy Duty Hose Reel
Reelcraft HD78005OLB | 1/2 in. x 75 ft. Heavy Duty Hose Reel
Accept Credit Cards
Official PayPal Seal

Reelcraft HD78005OLB | 1/2 in. x 75 ft. Heavy Duty Hose Reel Industries Inc_150px.jpg
Availability: In Stock
Part Number: RLCHD78005OLB
0 Review(s)
Write a Review
Retail Price:$715.63
Your Savings:$58.55(8%)
  • Low prices.

    Price match guarantee

  • In-House Experts.

    We know our products

  • Easy Returns.

    Quick & Hassle Free

  • Superior Selection.

    Extensive product catalog

Reelcraft offers a chemical resistant fluid path as an option for our most popular models series. The reels include a Stainless Steel path and swivel (components in contact with the fluid) that provide maximum protection for corrosive fluid applications. Standard swivel seals include Buna, though EPR and FKM are also available depending on compatibility requirements (consult Technical Services for assistance). Reels are typically shipped without hose as fluid compatibility must be confirmed.

Reel is shipped in the top wind position. The reel image is shown in the side wind position.

Key Features - Reelcraft HD78005OLB

  • Reinforced steel – The steel guide arm and base are stamped with ribs and gussets to insure maximum strength and lightest possible weight.
  • Ease of operation – The high quality, die-cast aluminum hub, and two sealed ball bearings produce a smoother spool rotation and easier operation.
  • Quality finish and corrosion resistant – Individually powder coated components offer the maximum protection from premature corrosion.
  • Versatility – The guide arm adjusts to seven different positions for versatile mounting and a wide range of applications.

Dimension Drawing - Reelcraft HD78005OLB

Click image to enlarge.Click image to enlarge.

Specifications - Reelcraft HD78005OLB

Weight54 lbs
Hose I.D.1/2"
Hose O.D.0.75"
Hose Length75'
Pressure500 psi
Inlet1/2" NPT(F)
Reel Outlet1/2" NPT(F)
Hose IncludedNo
Max Temperature210 °F

Fluid Path Materials - Reelcraft HD78005OLB

Shaft MaterialStainless Steel

FAQs - Reelcraft HD78005OLB

How do I increase or reduce spring tension?To increase spring tension:

Adding wraps of hose will increase spring tension. This can be accomplished by pulling out approximately 10 feet of hose, hand feed hose back up through roller bracket assembly until loop is large enough to slip over sheave. Add two or three wraps until desired tension is achieved. Do not exceed spring capacity.’

To reduce spring tension:

This can be accomplished by removing wraps of hose from the reel sheave. Remove wraps of hose from the sheave, one wrap at a time, until desired tension is obtained.

For Series D9000 reels, you will have to remove the bumper and control handle then feed the end of the hose through the roller bracket assembly to add or remove wraps of hose from the reel drum.

Can my spring driven reel be made "constant tension"?

While most Reelcraft spring retractable reels can be made “constant tension” at the factory or by simply removing the latching system there are some models that may not have this capability.

Please contact Reelcraft Customer Service to assure that the specific reel you have or require is capable of or available as a “constant tension” model.

How many GPM's will I get from my hose?GPM = gallons per minute is a function of hose diameter, hose length, supply pressure and fluid going through the hose / reel. The most common fluids, air and water, can be seen in charted data. For hydraulic oils it is necessary to know the operating temperature, pressure and fluid viscosity.
How do I install a new drive spring and set pre-turns?We have several different types of spring driven reels. Each require a slightly different set of instructions. For “How-To” instructions on replacing a drive spring please have your reel model or drive spring number available and consult customer service for instructions.

Videos - Reelcraft HD78005OLB

How to change a guide armClick to View
How to position the guide armClick to View
How to install a spring driven reelClick to View
How to replace the latch springClick to View
How to adjust spring tensionClick to View
How to change the hoseClick to View
Series HD70000 hose reelsClick to View
What to do if the reel does not latch?Click to View

CAD Drawings - Reelcraft HD78005OLB

CAD PDF 2D DrawingClick to View
CAD IGS 3D DrawingClick to View
CAD STP 3D DrawingClick to View

Documents and Downloads - Reelcraft HD78005OLB

Catalog PageClick to View
Pressure drop / flow rate charts and graphsClick to View
Material compatibility tablesClick to View

Parts/Accessories - Reelcraft HD78005OLB

S600608 - 340° Pivot BaseClick to View
600626 - Wall Mounted Universal Swing BracketClick to View

Recently Viewed Items