Milton 133 | Safety Blo-Gun with 10 in Extension

Safety blow gun with 10" angled extension is OSHA compliant as it limits pressure to 30 PSI when dead ended. Offers a maximum of 150 PSI on regulated compressed air lines. Blow gun offers 4.5 SCFM at 100 PSI. This extension is perfect for those hard to reach places. Has a 1/4" NPT air inlet and a nozzle thread size of 1/2" - 27.

Milton Industries - 133 - Features

• Maximum inlet pressure: 150 PSI
• SCFM 5.5 @ 100 PSI
• 1/4" NPT air inlet, nozzle thread 1/2"-27
• Zinc alloy body
• OSHA compliant.
• Classified by UNDERWRITERS LABORATORIES to comply with safety & health standards of Walsh-Healy act sections 50-204.8 nozzle pressure, and 50.204 noise level to comply with Williams-Steiger occupational safety and health act "OSHA" section 1910.95 noise level and 1910.242 (b) nozzle pressure. (With maximum inlet pressure of 150 PSI)This Blo-Gun has a specially engineered internal design to allow a maximum restricted discharge of 30 PSI. Approved by-pass safety nozzle.Four safety by-pass holes allow air to escape if tip-hole is blocked. By-pass holes do not interfere with normal air flow. Special internal design permits a restricted maximum discharge of 30 PSI. Discharges same air volume as full flow blo-guns, while maintaining required noise level and nozzle pressure. Bent to a special angle to clean out blind holes and offer convenient use on long reach applications.

Milton Industries - 133 - Overview

• 1/4" national pipe thread
• 4.5 standard cubic feet per minute at 100 pounds per square inch
• Maximum pressure of 150 pounds per square inch
• Classified by UL to OSHA standards 29CFR1910.95 and 29CFR1910.242(b)
• Safety Gun, 10" Ext.

Milton Industries - 133 - Related Products

• Milton KWIK-CHANGEÂ Universal Blow Gun Tip Adapter (S-168ADP)
• Milton KWIK-CHANGEÂ Universal Tip System, Blow Gun Nozzle Set (S-168)
• Milton 1/4" NPT Lever-Style Blow Gun (Pack of 10)
• Milton 7/16" - 27 Blow Gun Replacement Rubber Tip (Pack of 10)
• Milton Safety Blow Gun & 15" Extension

Milton Industries - 133 - Specifications

Order Part Number	MI133
Item Desc	Safety Blo-Gun w/ 10 In Extension
Product Group Id	MI00
Country of Origin	US
Harmonization Code	84242000
MS Bin Code	EG034
Default Selling Unit	EA
Status	Y
Short Description	Safety Gun, 10" Ext.
Number of Items in This Pack	1
UPC Code	30937300096
Made in USA	Yes
Manufacturer	Milton Industries Inc.
Material Type	No
Display on Bloguns CMS Page	No
SCFM	SCFM 4.5 @ 100 PSI
Maximum PSI	150 PSI
Maximum Pressure	Max Pressure 150 PSI
Air inlet NPT size	1/4" NPT Air Inlet
Height	0.875
Width	3
Length	17.25
Style	No
Blo Gun Body material	Zinc alloy body
OSHA Compliant	OSHA compliant