KnKut KK3-6.5SW | Knkut 6.5 Mm Spot-Weld Drill

American made KnKut Spot Weld Drills are designed to effectively cut auto panel spot welds. Made of Cobalt Steel, the high red hardness permits speeds 30% greater than high speed steel spot weld drills. Cobalt Steel is substantially more abrasion resistant, resulting in a very long lasting cutting edge. KnKut Spot Weld Drills have a spur point, designed to cut through the weld on one panel while leaving only a slight penetration into the second panel. The modified point is chip resistant.

KnKut - KK3-6.5SW - Features

• KnKut 6.5 mm Spot-Weld DrillKnKut Spot Weld Drills are designed to effectively cut auto panel spot welds. Made of Cobalt Steel, the high red hardness permits speeds 30% greater than high speed steel spot weld drills. Cobalt Steel is substantially more abrasion resistant, resulting in a very long lasting cutting edge. KnKut Spot Weld Drills have a spur point, designed to cut through the weld on one panel while leaving only a slight penetration into the second panel. The modified point is chip resistant.
• Made In USA
• KnKut Spot Weld Drills have a spur point, designed to cut through the weld on one panel while leaving only a slight penetration into the second panel.
• Chip Resistant Point
• More Abrasion Resistant than HSS Bits
• Drills Stainless Steel and Titanium Alloy
• Cobalt Steel
• DIAMETER (MM)
• 6.5
• APPROXIMATE SPOT WELD SIZE (INCHES)
• 1/4"
• FLUTE LENGTH (INCHES)
• 1/2"
• OVERALL LENGTH (INCHES)
• 1.75
• Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

KnKut - KK3-6.5SW - Product Categories

• Power Tool Accessories
• Drill Bits
• Individual Drill Bits

KnKut - KK3-6.5SW - Specifications

Brand Name	KnKut
Manufacturer Part Number	KK3-6.5SW
Item Description	Knkut 6.5 Mm Spot-Weld Drill
Weight	0.50 lbs.
Case Quantity	EA
Item Warranty	No warranty
Length	1.75
Width	0.26
Country of Manufacture	United States