Kent Moore Tools J-44295-A | Clutch Pack Shimming Service Kit
J-44295-A is used to deTermine the selective shim required for the Clutch Pack in most Transfer cases.
Shimming Surface Tool
Type Shimming Surface Tool
Used On Item Clutch Pack Transfer Case
Kent Moore Tools - J-44295-A - Product Categories
- Automotive Specialty Tools
- Drive Train- Transmission
- Clutch Service Tools
Kent Moore Tools - J-44295-A - Features
- J-44295-A is used to determine the selective shim required for the clutch Pack in most Transfer cases
- For General Motors.
- Applications: 1998-2007 NP246 transfer cases
- Superseded to J-44295-A
- C/K, M/L, S/T Trucks. Correct Shimming of the automatic 4WD clutch pack is critical to the durability of the unit. The clutch pack must be measured within .001" and be shimmed within .012" window. J-44295 includes a plate to mount the clutch pack on, a 10 lb. weight to compress the discs, and a gauge lock to measure with. If correct shimming is not achieved, the clutch pack could be worn out prematurely. Place the clutch pack into the hole on J-44295-1 platform. Then install J-44295-2 onto the clutch pack. Place the J-44295-3 gauge block on one of the legs and over the edge of the weight. The use of a feeler gauge to measure the gap between the gauge block and the weight, will be required. Repeat this step on all three legs. Average the thickness and choose the correct shims to equal this distance. Use a max of two shims.
- Tillman Tools is a convenient resource for your shop tools. You can easily order equipment online and have the products delivered right to your address.
Kent-Moore Tools - J-44295-A - Specifications
| Brand Name | Kent-Moore Tools |
| Manufacturer Part Number | J-44295-A |
| Item Description | Clutch Pack Shimming Service Kit |
| UNSPSC | 25191700 |
| Additional Information | Used On Item Clutch Pack Transfer Case |
| Manufacturer Part Number | J-44295-A |
| product Group Id | KM00 |
| Country of Origin | US |
| Harmonization Code | 82022000 |
Kent Moore Tools - J-44295-A - Other Kent Moore products
| J44298A - Air Bag Release Tool | Click to View |
| J44339 - Installer/Rev Syncro | Click to View |
| J44340 - Installer/Bearing | Click to View |
| J44427 - Spanner Wrench | Click to View |
| J44466-11 - Recylcing Block F/KMJ44466 | Click to View |
| J44466-12 - Fuel Injector/Control Unit Adapter | Click to View |
| J44466-13 - Nut Knurled Screw | Click to View |
| J44467 - Automatic Transaxle Output Shaft Assembly Remover and Installer | Click to View |
| J44551A - A/C Suction | Click to View |
| J44570A - Bushing Replacer | Click to View |
