Kent Moore Tools J-43265 | Nozzle Sleeve Remover

When Leakage occurs between the Cylinder head and the Sleeve, or service is being performed to the Cylinder head, the Sleeves and their Seals should be replaced. J-43265 is used to remove the Sleeve. It uses the top deck of the Cylinder head Supported on wooden Blocks while driving the Sleeve from below.?Once the tip of J-43265 is engaged into the lower End of the Nozzle Sleeve, a mallet is used against the Driver End of J-43265 to remove the Nozzle Sleeve from the Cylinder head.Note:?EN-49960 may be used to replace the Injector Nozzle Sleeve with the head Installed on the Engine Block in place of J-43265 and J-43266

Kent Moore Tools - J-43265 - Product Categories

• Automotive Specialty Tools
• Removal & Installation

Kent Moore Tools - J-43265 - Features

• For General Motors.
• Applications: DURAMAX 7800, 7.8L, 2005 Isuzu NPR 4HK1
• Used with J-43266
• When ever a leakage occurs between the cylinder head and the sleeve or service is being performed to the cylinder head, the sleeves and their seals should be replaced. J43265 is used to remove the sleeve. It uses the top deck of the block as support while pulling the sleeve from below.
• Tillman Tools is a convenient resource for your shop tools. You can easily order equipment online and have the products delivered right to your address.

Kent-Moore Tools - J-43265 - Specifications

Brand Name	Kent-Moore Tools
Manufacturer Part Number	J-43265
Item Description	Nozzle Sleeve Remover

Kent Moore Tools - J-43265 - Partial List of Applications

Engine Mechanical : Engine : Kodiak	1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Engine Mechanical : Engine : TopKick C-Series	2007, 2008, 2009
Engine Mechanical : Engine : T-Series Medium Duty	2007, 2008
Gas Mechanical : Engine : Chevrolet T-Series Medium Duty Truck F6/F7/F8	2003, 2004, 2005
Gas Mechanical : Engine : GMC T-Series Medium Duty Truck F6/F7/F8	2003, 2004, 2005
Gas Mechanical : Engine : Kodiak C-Series (Conventional) C6/C7/C8	2004
Gas Mechanical : Engine : TopKick C-Series (Conventional) C6/C7/C8	2004

Kent Moore Tools - J-43265 - Other Kent Moore products

EN-50613 - Injector Remover	Click to View
J-44435 - Pwr Steering Bleeder Adapter	Click to View
DT-51626 - Tpim Protector	Click to View
EL-49903-4 - Onstar -Gen 9 Cable Assembly	Click to View
DT-52086 - Piston Return Spring Compressor	Click to View
EL-49903-7 - Onstar -Gen10 Antenna Adapter	Click to View
CH-51034-A - Cradle Alignment Pins	Click to View
DT-51089 - Clutch Housing Bearing Installer	Click to View
DT-51750 - Pinion Seal Installer	Click to View
J-42491 - Door Trim Pad Remover	Click to View