100% SatisfactionGUARANTEE
90-Day Returns
Genuine Product Guarantee
  1. Home
  2. Manufacturers
  3. Kent Moore Tools
  4. Kent-Moore Tools J-35597-A | Detroit Diesel Cylinder Liner Installer


Kent-Moore Tools J-35597-A | Detroit Diesel Cylinder Liner Installer
Kent-Moore Tools J-35597-A | Detroit Diesel Cylinder Liner Installer
Accept Credit Cards
Official PayPal Seal

Kent-Moore Tools J-35597-A | Detroit Diesel Cylinder Liner Installer

https://www.autotoolworld.com/assets/images/kent-new-logo-120.jpg
Availability: In Stock
Part Number: KMJ-35597-A
0 Review(s)
Write a Review
$408.54
Have a question or need a quote?

  • Low prices.

    Price match guarantee

  • In-House Experts.

    We know our products

  • Easy Returns.

    Quick & Hassle Free

  • Superior Selection.

    Extensive product catalog

Kent-Moore Tools J-35597-A | Detroit Diesel Cylinder Liner Installer


https://www.autotoolworld.com/assets/icons/features.jpg

Kent-Moore Tools - J-35597-A - Features

  • Designed to install cylinder liners for Detroit Diesel 14.0L & 12.7L 60 Series engines
  • Instructions:
  • Simply slide the cylinder kit assembly into the cylinder block noting the position of the connecting rod to ensure the rod is assembled to the same position as it was when removed.
  • Push by hand until resistance is felt. Install cylinder liner installer (J–35597–A) over the kit to be installed. It is necessary to leave the cylinder kit installation tool in place until after the liner protrusion is measured.
  • Thread three cylinder head bolts through the tool and into a head bolt hole, so that the round shoe of the tool is centered over the liner. Alternately tighten the three bolts until they are tight.
  • This tool is used to install the cylinder liner. Series 60
  • Turn the threaded center bolt in a clockwise direction. As the round shoe of the tool reaches the liner, ensure that the shoe is properly positioned into the cylinder liner. Continue turning the bolt until the liner bottoms in the cylinder counterbore.
  • Apply a tightening torque of 60 N·m (44 lb·ft) to the installation tool center bolt.
  • Install a dial indicator sled gage. Measure the distance from the top of the liner flange to the top of the block and remove the cylinder liner tool.
  • Manufacturer: SPX/Bosch (OTC Rotunda Kent-Moore Miller)



https://www.autotoolworld.com/assets/icons/specs.jpg

Kent-Moore Tools - J-35597-A - Specifications

Brand NameKent-Moore Tools
Manufacturer Part NumberJ-35597-A
Item DescriptionDetroit Diesel Cylinder Liner Installer

Related Items

Kent Moore Tool J-48836-1 | Wrench, HDE 22Mm Ampline Offset
Kent Moore Tool J-48836-1 | Wrench, HDE 22Mm Ampline Offset
(0)
$203.73
Buy Buy Buy
Kent Moore Tool J-9708-18 | Valve Lash Feeler Gauge Set
Kent Moore Tool J-9708-18 | Valve Lash Feeler Gauge Set
(0)
$57.08
Buy Buy Buy
Kent Moore Tool MEL1653-7 | Handle, Long
Kent Moore Tool MEL1653-7 | Handle, Long
(0)
$240.93
Buy Buy Buy
Kent Moore Tool ZTSE4402 | TAS55 / TAS65 Tool Kit
Kent Moore Tool ZTSE4402 | TAS55 / TAS65 Tool Kit
(0)
$955.57
Buy Buy Buy
Kent Moore Tool ZTSE4662 | 4-Wire UVC Breakout Harness
Kent Moore Tool ZTSE4662 | 4-Wire UVC Breakout Harness
(0)
$125.34
Buy Buy Buy

Recently Viewed Items

Logo