Kent Moore Tools EN-51766 | Rear Seal Installer Pilot
The Rear Crank Shaft Seal is part of the Rear cover, and Installed to the Rear face of the Block as an Assembly on HF V6 Engines. For Gen II HF V6, the Pilot on the Rear flange of the Crank Shaft has an increased diameter, and the Flywheel mounting Bolts have changed from M10x1.0 to M10x1.5 thread pitch, so current EN-47839 does not fit. EN-51766 fits the HF V6 Gen II rCrank Shaft, and Pilots the Rear Seal Housing into position without letting the Seal lip roll over on the Crank Shaft lip. The OD edge of EN-51766 fits over the lead-in chamfer on the Crank to prevent the Seal lip from catching. If EN-51766 is not used, the Seal lip may roll on the edge of the Crank Shaft, causing a Leak.
Kent Moore Tools - EN-51766 - Product Categories
- Automotive Specialty Tools
- Drive Train- Transmission
- Seal Removal & Installation
Kent Moore Tools - EN-51766 - Features
- The rear crankshaft seal is part of the rear cover, and installed to the rear face of the block as an assembly on HF V6 engines. For Gen II HF V6, the pilot on the rear flange of the crankshaft has an increased diameter, and the flywheel mounting bolts have changed from M10x1.0 to M10x1.5 thread pitch, so current EN-47839 does not fit. EN-51766 fits the HF V6 Gen II rcrankshaft, and pilots the rear seal housing into position without letting the seal lip roll over on the crankshaft lip. The OD edge of EN-51766 fits over the lead-in chamfer on the crank to prevent the seal lip from catching. If EN-51766 is not used, the seal lip may roll on the edge of the crankshaft, causing a leak.
Kent-Moore Tools - EN-51766 - Specifications
| Brand Name | Kent-Moore Tools |
| Manufacturer Part Number | EN-51766 |
| Item Description | Rear Seal Installer Pilot |
Kent Moore Tools - EN-51766 - Partial List of Applications
| Engine Mechanical - 3.0L (LGW) or 3.6L (LGX) : Engine/Propulsion : CT6 | 2016, 2017 |
| Engine Mechanical - 3.6L (LF4 LGX) : Engine/Propulsion : ATS | 2016 |
| Engine Mechanical - 3.6L (LGX LF3) : Engine/Propulsion : CTS | 2016, 2017 |
| Engine Mechanical - 3.6L (LGX LF4) : Engine/Propulsion : ATS | 2017 |
| Engine Mechanical - 3.6L (LGX) : Engine/Propulsion : Acadia | 2017 |
| Engine Mechanical - 3.6L (LGX) : Engine/Propulsion : Camaro | 2016, 2017 |
| Engine Mechanical - 3.6L (LGX) : Engine/Propulsion : LaCrosse | 2017 |
| Engine Mechanical - 3.6L (LGX) : Engine/Propulsion : XT5 | 2017 |
| Engine Mechanical - 3.6L (LGZ) : Engine/Propulsion : Canyon | 2017 |
| Engine Mechanical - 3.6L (LGZ) : Engine/Propulsion : Colorado | 2017 |
Kent Moore Tools - EN-51766 - Other Kent Moore products
| GE-47716-20 - Cooling System Fill Adapter | Click to View |
| J-35710 - King Pin Key Bolt Remover | Click to View |
| J-41778-1 - Pump Bushing Installer | Click to View |
| KM-958 - Installer | Click to View |
| EN-52486 - Oil Pressure Gauge Adapter | Click to View |
| DT-52555 - Side Bearing Installer | Click to View |
| DT-46625-20 - Adapters, Holding Fixture | Click to View |
| J-42120-1 - Puller Leg | Click to View |
| J-45027-2 - Adapter | Click to View |
| J-8433-5 - Puller Crossbar | Click to View |
