Kent Moore Tools EN-51614 | DPF Injector Test Adapters

EN-51614 allows the DPF Injector to be Tested Outside of the exhaust System.?Once the DPF Injector is removed from the exhaust, it is re-attached to the Fuel Line upSide down, and the Block-off Plate of EN-51614 is Installed on the exhaust Manifold to prevent exhaust Leaks.?The Test Fixture Block is Installed to the Injector Bracket to Retain the Injector, and a Hose is Installed over the Injector Nozzle to direct the Fuel Released into one of the Test Tubes from J-45873 Fuel return volume Test kit.?The Engine is then started, and the Injector triggered for a specific amount of time.?The Fuel injected during this time is measured to deTermine if the Injector is operating properly.

Kent Moore Tools - EN-51614 - Features

• EN-51614 allows the DPF injector to be tested outside of the exhaust system. Once the DPF injector is removed from the exhaust, it is re-attached to the fuel line upside down, and the block-off plate of EN-51614 is installed on the exhaust manifold to prevent exhaust leaks. The test fixture block is installed to the injector bracket to retain the injector, and a hose is installed over the injector nozzle to direct the fuel released into one of the test tubes from J-45873 fuel return volume test kit. The engine is then started, and the injector triggered for a specific amount of time. The fuel injected during this time is measured to determine if the injector is operating properly.

Kent-Moore Tools - EN-51614 - Specifications

Brand Name	Kent-Moore Tools
Manufacturer Part Number	EN-51614
Item Description	DPF Injector Test Adapters

Kent Moore Tools - EN-51614 - Partial List of Applications

Engine Exhaust : Engine/Propulsion : 4500HD Medium Duty	2017
Engine Exhaust : Engine/Propulsion : 4500XD Medium Duty	2017

Kent Moore Tools - EN-51614 - Other Kent Moore products

GE-41415-60 - Leak Test Adapter	Click to View
J-39970-100 - Electronic Pressure Gauge Adapter	Click to View
J-43791 - Output/Turbine Shaft Bushing	Click to View
DT-50498 - Differential Bearing Cup Installer	Click to View
DT-50806-3 - Receiver	Click to View
EN-51007-5 - Support Leg, Front	Click to View
J-45404 - T/M Indicator Alignment Tool	Click to View
J-45507 - Caliper Boot Seal Installer	Click to View
KM-473 - Installing Tube	Click to View
J-43779 - Pump/Valve Body Pin Installer	Click to View