Kent Moore Tools EN-48672 | GM Rear Main Seal Remover - 60 Degree V6

The Rear Seal is difficult to remove in both reverse Installation and high-mileage applications, and some Removal methods can lead to Block or Crank Shaft damage. EN-48762 mounts to the Rear face of the Crank Shaft, and allows screws to Pass through its Body into the Seal. The forcing screw of EN-48762 is tightened into the Rear Pilot Bore of the Crank Shaft to draw the Seal from its Bore without any component damage.

Kent Moore Tools - EN-48672 - Product Categories

• Automotive Specialty Tools
• Drive Train- Transmission
• Seal Removal & Installation

Kent Moore Tools - EN-48672 - Features

• Mounts to the rear face of the crankshaft
• Allows screws to pass through its body into the seal
• The forcing screw of EN-48762 is tightened into the rear pilot bore of the crankshaft to draw the seal from its bore without any component damage
• Benefits:
• Safely removes rear main seals without damaging the crankshaft or block
• Easy to use
• Saves time and money
• For GM / General Motors. The rear seal is difficult to remove in both reverse installation and high-mileage applications, and some removal methods can lead to block or crankshaft damage. EN-48762 mounts to the rear face of the crankshaft, and allows screws to pass through its body into the seal. The forcing screw of EN-48762 is tightened into the rear pilot bore of the crankshaft to draw the seal from its bore without any component damage.

Kent Moore Tools - EN-48672 - Overview

• Kent-Moore | GM Rear Main Seal Remover - 60 Degree V6 | EN-48672
• Applications: 60 Degree V6
• The rear main seal is difficult to remove in both reverse installation and high-mileage applications, and some removal methods can lead to block or crankshaft damage. The Kent-Moore EN-48762 Rear Main Seal Remover is designed to remove rear main seals without damaging the crankshaft or block.

Kent-Moore Tools - EN-48672 - Specifications

Brand Name	Kent-Moore Tools
Manufacturer Part Number	EN-48672
Item Description	GM Rear Main Seal Remover - 60 Degree V6
Shipping Weight	5lbs

Kent Moore Tools - EN-48672 - Partial List of Applications

Engine Mechanical : Engine : AURA	2007, 2008, 2009, 2010
Engine Mechanical : Engine : BAS Hybrid	2007, 2008, 2009, 2010
Engine Mechanical : Engine : Captiva Sport	2008, 2009, 2010, 2011
Engine Mechanical : Engine : G6	2005, 2006, 2007, 2008, 2009, 2010
Engine Mechanical : Engine : Impala	2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Engine Mechanical : Engine : Lucerne	2006, 2007, 2008, 2009, 2010, 2011
Engine Mechanical : Engine : Malibu Classic	2008
Engine Mechanical : Engine : Malibu	1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Engine Mechanical : Engine : Montana SV6	2005, 2006, 2007, 2008, 2009
Engine Mechanical : Engine : Monte Carlo	1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Engine Mechanical : Engine : RELAY	2005, 2006, 2007, 2008
Engine Mechanical : Engine : Rendezvous	2002, 2003, 2004, 2005, 2006, 2007
Engine Mechanical : Engine : Terraza	2005, 2006, 2007, 2008
Engine Mechanical : Engine : Uplander	2005, 2006, 2007, 2008, 2009
Engine Mechanical : Engine : VUE Hybrid	2008, 2009, 2010
Engine Mechanical : Engine : VUE	2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Engine : Engine : Equinox	2011
Engine : Engine : Impala	2011
Engine : Engine : Lucerne	2011
Engine : Engine : Malibu	2011

Kent Moore Tools - EN-48672 - Other Kent Moore products

EN-48749 - Retainer, Timing Chain	Click to View
EN-48853 - Front Cover Aligner	Click to View
EN-48898 - Supercharger Lifting Fixture	Click to View
EN-48974-15 - EGR Cooler Test Adapter 17MM	Click to View
EN-49191 - Torque Wrench Adapter	Click to View
EN-49204 - Installer	Click to View
EN-49247 - Injector Retaining Clip Installer	Click to View
EN-49774 - Injector remover	Click to View
EN-49941 - remover / Installer Piston Retainer Ring	Click to View
EN-49977 - Camshafts And Sensor Disks Locking Tool	Click to View