Kent Moore Tools DT-51918 | Bearing Cup Installer

There are four tapered Bearing cups in the AF50-8 Transmission that must be removed and Installed during unit Repair procedures, two in the Torque converter Housing and two in the Transmission case. DT-51918 has multiple steps and diameters to allow for Installation of all four Bearing cups and contacts each cup on its top edge so the cup micro-finish tapered contact surface for the Bearing rollers in not damaged. DT-51918 is used with the previously essential J-8092 Driver Handle.

Kent Moore Tools - DT-51918 - Features

• There are four tapered bearing cups in the AF50-8 transmission that must be removed and installed during unit repair procedures, two in the torque converter housing and two in the transmission case. DT-51918 has multiple steps and diameters to allow for installation of all four bearing cups and contacts each cup on its top edge so the cup micro-finish tapered contact surface for the bearing rollers in not damaged. DT-51918 is used with the previously essential J-8092 Driver Handle.

Kent-Moore Tools - DT-51918 - Specifications

Brand Name	Kent-Moore Tools
Manufacturer Part Number	DT-51918
Item Description	Bearing Cup Installer

Kent Moore Tools - DT-51918 - Partial List of Applications

Automatic Transmission - Aisin AF50-8 (MRC) : Transmission : LaCrosse	2017
Automatic Transmission - Aisin AF50-8 (MRC) : Transmission : Malibu	2016
Automatic Transmission - Aisin AF50-8 (MRC) : Transmission : XT5	2017

Kent Moore Tools - DT-51918 - Other Kent Moore products

J-43765-1 - Spacer Ring	Click to View
DT-51776 - Seal Installer	Click to View
J-43265 - Nozzle Sleeve Remover	Click to View
EN-50613 - Injector Remover	Click to View
J-44435 - Pwr Steering Bleeder Adapter	Click to View
DT-51626 - Tpim Protector	Click to View
EL-49903-4 - Onstar -Gen 9 Cable Assembly	Click to View
DT-52086 - Piston Return Spring Compressor	Click to View
EL-49903-7 - Onstar -Gen10 Antenna Adapter	Click to View
CH-51034-A - Cradle Alignment Pins	Click to View