Kent Moore Tools DT-51750 | Pinion Seal Installer
The Pinion Seal on Linamar RDMs used in 2016 Camaro and CT6 models must be instatlled onto the Pinion Shaft and into the Carrier Housing at the same time. Exsitng Seal Installers typically Pilot on the Sealing lips because the flange competes the Seal once it is Installed, but this Seal Seals directly onto the Pinion Shaft. The flange is Installed above the Seal, and is not used to Seal the RDM. DT-51750 Installs the Seal correctly, and is used with existing Drive J-5590 to Install the Seal into the correct position. Unapproved methods may damage the Seal, causing less than desired service life.
Kent Moore Tools - DT-51750 - Product Categories
- Automotive Specialty Tools
- Drive Train- Transmission
- Seal Removal & Installation
Kent Moore Tools - DT-51750 - Features
- The pinion seal on Linamar RDMs used in 2016 Camaro and CT6 models must be instatlled onto the pinion shaft and into the carrier housing at the same time. Exsitng seal installers typically pilot on the sealing lips because the flange competes the seal once it is installed, but this seal seals directly onto the pinion shaft. The flange is installed above the seal, and is not used to seal the RDM. DT-51750 installs the seal correctly, and is used with existing drive J-5590 to install the seal into the correct position. Unapproved methods may damage the seal, causing less than desired service life.
Kent-Moore Tools - DT-51750 - Specifications
| Brand Name | Kent-Moore Tools |
| Manufacturer Part Number | DT-51750 |
| Item Description | Pinion Seal Installer |
Kent Moore Tools - DT-51750 - Partial List of Applications
| Rear Drive Axle : Driveline /Axle : Camaro | 2016, 2017 |
| Rear Drive Axle : Driveline /Axle : CT6 | 2016, 2017 |
Kent Moore Tools - DT-51750 - Other Kent Moore products
| J-42491 - Door Trim Pad Remover | Click to View |
| J-42572 - Cv Boot Clamp Pliers | Click to View |
| J-45134 - Forward/Coast Cluch Inner Piston Protector | Click to View |
| J-45185 - Bore Gauge Set | Click to View |
| KM-235-6 - Rear Crank Shaft Seal Pilot | Click to View |
| EN-51367 - Cam Shaft Holder | Click to View |
| J-46588 - Axle Seal Crimper | Click to View |
| EN-51145 - Rear Crank Shaft Seal Installer | Click to View |
| EN-42385-70 - Head Bolt Thread Repair | Click to View |
| EN-52451 - Fuel Injector Remover | Click to View |
