Kent Moore Tools DT-50712 | Bearing Cup Remover

Application: 2019 Cruze and Malibu with VT40 Automatic Transmission, 2020 Buick Encore GX and Chevrolet TRailblazer w/VT40 (RPO MRG) TransmissionDT-50712 is a 6-segment expandable collet Tool used to remove the Carrier Bearing 57 mm cup out of the Transmission case. The tapered lip on each segment wedges between the flat End of the cup and the bottom of the cup Bore. As the hex collar of the Tool is turned with a Wrench, the segments expand and capture the cup.The forcing screw from the previously essential J-45124 Puller Bridge and Leg Assembly is Threaded into DT?50712 and the Legs are spaced slightly wider than the cup OD and tightened. Turning the forcing screw gradually pulls the cup up through the Bridge Legs to remove it without scoRing or damage to the aluminum case Bore.Note: This is an essential Tool that most dealers have previously received. Your shipment may not include this Tool Based on your dealership essential Tool shipment history. Refer to the shipment Packing list for confirmation. There is a location in the DT-52330 Case for storage of the Tool.

Kent Moore Tools - DT-50712 - Product Categories

• Automotive Specialty Tools
• Engine Repair
• Bearing - Bushing Pullers & Inst

Kent Moore Tools - DT-50712 - Features

• DT-50712 is a 6-segment expandable collet tool that is used to remove the bearing cup in the clutch housing that supports one side of the lower countershaft. The tapered lip on each segment wedges between the flat end of the cup and the bottom of the cup bore. As the hex collar of the tool is turned with a wrench the segments expand and capture the cup. The forcing screw from the previously essential J-45124 Puller Bridge and Leg Assembly is threaded into DT-50712 and the legs are spaced slightly wider than the cup OD. The forcing screw is turned and the cup is gradually removed up through the puller legs without damage to the aluminum clutch housing bore.

Kent-Moore Tools - DT-50712 - Specifications

Brand Name	Kent-Moore Tools
Manufacturer Part Number	DT-50712
Item Description	Bearing Cup Remover

Kent Moore Tools - DT-50712 - Partial List of Applications

Manual Transmission - Eaton 5-Speed (MYG) : Transmission : Colorado	2016
Manual Transmission - Eaton 5-Speed (MYG) : Transmission : Colorado7	2016
Manual Transmission - Eaton 5-Speed (MYG) : Transmission : S10	2016
Manual Transmission - Eaton 5-Speed (MYG) : Transmission : Trailblazer	2016
Manual Transmission - Eaton 6-Speed (N8D MA2) : Transmission : Colorado	2016, 2017
Manual Transmission - Eaton 6-Speed (N8D MA2) : Transmission : Colorado7	2016
Manual Transmission - Eaton 6-Speed (N8D MA2) : Transmission : S10	2016, 2017
Manual Transmission - Eaton 6-Speed (N8D MA2) : Transmission : Trailblazer	2016, 2017
Manual Transmission - Eaton 6-Speed (N8D) : Transmission : Canyon	2016, 2017
Manual Transmission - Eaton 6-Speed (N8D) : Transmission : Colorado	2016, 2017

Kent Moore Tools - DT-50712 - Other Kent Moore products

J-38125-SIR - Sir/Srs Terminal Repair Supplement Kit	Click to View
CH-47960-10 - Digital Angle Gauge Adapter	Click to View
CH-47976-504 - Sidi Harness Kit	Click to View
EL-51763 - Battery Section Covers	Click to View
EN-47630 - Holder Crank Shaft	Click to View
J-44767 - Seal Installer	Click to View
J-45135 - Overdrive & Intermediate Clutch Piston Protector	Click to View
J-44875 - Right Bearing Race Installer	Click to View
J-45951 - Seal Installer	Click to View
GE-47716-30A - Adapter, Cooling System Fill	Click to View