Kent Moore Tools DT-48005 | Remover, Pinion Cart Bearing
The Pinion Bearing on the Getrag 626 Axle must be removed from the Pinion in order to select the required shims for the Pinion cartridge and Side Bearings. DT-48005 is tightened around the Bearing, and placed onto a hydraulic press bed. The press and J-42162 are then used to push the Pinion out of the Bearing. If the Bearing is damaged, the entire Pinion partridge Housing, both Bearings and cups, and selective Spacer must all be replaced, since they are a matched Set. Failure to use DT-48005 will result in Bearing damage, and unnecessary Repair expense.
Kent Moore Tools - DT-48005 - Product Categories
- Automotive Specialty Tools
- Engine Repair
- Bearing - Bushing Pullers & Inst
Kent Moore Tools - DT-48005 - Features
- For GM / General Motors. The pinion bearing on the Getrag 626 axle must be removed from the pinion in order to select the required shims for the pinion cartridge and side bearings. DT-48005 is tightened around the bearing, and placed onto a hydraulic press bed. The press and J-42162 are then used to push the pinion out of the bearing. If the bearing is damaged, the entire pinion partridge housing, both bearings and cups, and selective spacer must all be replaced, since they are a matched set. Failure to use DT-48005 will result in bearing damage, and unnecessary repair expense.
Kent-Moore Tools - DT-48005 - Specifications
| Brand Name | Kent-Moore Tools |
| Manufacturer Part Number | DT-48005 |
| Item Description | Remover, Pinion Cart Bearing |
Kent Moore Tools - DT-48005 - Partial List of Applications
| Rear : Drive Line : Corvette | 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006 |
| Rear : Drive Line : XLR | 2006 |
| Driveline /Axle : Driveline /Axle : Corvette | 2011 |
| Rear Drive Axle : Drive Line : Corvette | 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 |
| Rear Drive Axle : Driveline /Axle : Corvette | 2013 |
Kent Moore Tools - DT-48005 - Other Kent Moore products
| DT-48008 - Press Support | Click to View |
| DT-48009 - Shim Selector kit | Click to View |
| DT-48021 - Seal Installer | Click to View |
| DT-48055 - Lube Dam Remover | Click to View |
| DT-48056 - Spring Compressor Bridge | Click to View |
| DT-48060-A - Bushing Replacer | Click to View |
| DT-48065 - 2,6 Clutch Spring Compressor | Click to View |
| DT-48066 - Seal Installer | Click to View |
| DT-48067 - Holding Fixture Adapter | Click to View |
| DT-48068 - Low Clutch Sprag Retaining Ring Cone/Pusher | Click to View |
