Kent Moore Tools CH-48107 | Replacer, Bushing

Conventional Tool are unable to remove and Install the Front suspension lower Control Arm bushing. CH-48107 is Installed over the Bushing flange and, when used with J-02619-A, quickly and easily removes the outboard half of the Bushing. Once removed, J-5590 is used to Drive the inboard half of the Bushing out. CH-48107 is then used along with a typical bench vise to Install both halves of the Bushing into the Control Armsimultaneously. Attempts to replace the lower Control Arm bushing without CH-48107 could result in increased labor time and/or component damage.

Kent Moore Tools - CH-48107 - Product Categories

• Automotive Specialty Tools
• Drive Train- Transmission
• Bushing Tools

Kent Moore Tools - CH-48107 - Features

• For GM / General Motors. Conventional tool are unable to remove and install the front suspension lower control arm bushing. CH-48107 is installed over the bushing flange and, when used with J-02619-A, quickly and easily removes the outboard half of the bushing. Once removed, J-5590 is used to drive the inboard half of the bushing out. CH-48107 is then used along with a typical bench vise to install both halves of the bushing into the control arm simultaneously. Attempts to replace the lower control arm bushing without CH-48107 could result in increased labor time and/or component damage.

Kent-Moore Tools - CH-48107 - Specifications

Brand Name	Kent-Moore Tools
Manufacturer Part Number	CH-48107
Item Description	Replacer, Bushing

Kent Moore Tools - CH-48107 - Partial List of Applications

Front Suspension : Suspension : Acadia Limited	2017
Front Suspension : Suspension : Acadia	2013, 2014, 2016
Front Suspension : Suspension : Enclave	2013, 2014, 2016, 2017
Front Suspension : Suspension : Traverse	2013, 2014, 2016, 2017
Suspension : Suspension : Acadia	2011
Suspension : Suspension : Enclave	2011, 2012

Kent Moore Tools - CH-48107 - Other Kent Moore products

CH-48358 - Front Control Arm Rear Bushing Replacer	Click to View
CH-48600 - P.S. Analyzer	Click to View
CH-48894 - Drive Axle Boot Clamp Pliers	Click to View
CH-49240-A - Ball Joint Installer	Click to View
CH-50636 - Rear Drive Axle Hub Bridge Nut Socket	Click to View
CH-50732 - Strut Rod Nut Socket 18 mm	Click to View
CH-51064 - Fuel Pressure Gauge Adapter	Click to View
DT-44395-B - Transmission Holding Fixture	Click to View
DT-45939 - Tool Storage Case, On-Vehicle	Click to View
DT-45940 - Tool Storage Case, DT Unit	Click to View