Application: 9T50, 10L80, and 10L90 TransmissionsTool not available for individual purchase. Only available as part of kit. Order kit DT-52039 kit available as a Loaner Tool. Includes all Tools to service GRE Transmission.DT-51892 consists of a special design four-ArmBridge with three Legs, a forcing screw, thrust Bearing, washer, and Nut. This Universally adjustable Tool is used with a hydraulic press to compress the 2-9 Clutch Piston Spring in the 9T50 Transmission and the various size Clutch Piston Springs and Piston dams in 10L80 and 10L90 Transmissions.
The Bridge holds the Clutches in a compressed position, allowing the Retaining Rings to be either removed or Installed by the technician. The orientation of the Bridge’s four arms allows the Tool to be used with three Legs at 120° apart for the Clutch Springs or, if needed, two Legs opposite each other at 180° for other service procedures such as Bearing Removal.
Partial List of Applications
| (Automatic Transmission - 4EL70 (MRD) : Transmission : CT6 | 2017 |
| Automatic Transmission - 10L90 (MGL) : Transmission : Camaro | 2017 |
| Manual Transmission : Transmission : ATS | 2013, 2014 |
Other Kent Moore products
| J-8520 - Cam Lobe Lift Indicator | Click to View |
| J-44379 - Differential Bearing Puller Plate | Click to View |
| EN-44226-5 - Crank Shaft Protector | Click to View |
| CH-48845-A - Strut Spring Compressor | Click to View |
| J-44228-A - Valve Spring Compressor | Click to View |
| J-45933 - Bearing/Annulus Gear Installer | Click to View |
| J-44525-A - Tool, C1 Backing Plate Selector | Click to View |
| EN-52575 - Dpf Injector Cleaner | Click to View |
| CH-51450-PP652 - Oscilloscope Pressure Transducer, Wps500 | Click to View |
| DT-51629 - Pinion Shim Selector kit | Click to View |
