JPW Industries 1791293 | OES9138 Sander, 3HP 3PH 230/460V

The large 11-3/4" x 48" table on the OES9138 oscillating edge sander travels a full 8" in vertical height to accommodate most woodworking pieces. It will also tilt negative 5 and out to positive 45. The cast iron platen is a generous 48" x 9-1/2" and covered with graphite for production sanding, offering super support and cooler running to extend belt life. With 24 oscillations per minute you can use the entire belt face without burning. A 3HP motor powers the belt and runs a large gearbox to provide the oscillating action. The entire head pivots on a massive shaft with two sealed ball bearings for trouble-free performance. Dual dust collection ports keep the work area clean and extend the life of your abrasive belt.

JPW Industries - 1791293 - Features

• Large radius end table has 6" vertical travel and 45 tilt for any angle and working height needed
• Spring loaded, quick release lever makes belt changes quick and easy
• Precision balanced 9" diameter drive drum and 4" diameter rubber coated idler pulley for positive drive and rigid tracking
• Large 11-3/4" x 48" front worktable with 8" vertical travel and 45 tilt, includes miter head for angle work
• Oscillates 24 cycles per minute for better finish and longer belt life
• Dual dust collection ports keep work area clean and extend abrasive belt life
• Rugged bearing-assisted tensioning device for fast belt changes and quick adjust tracking
• Heavy-duty oscillating gearbox and shaft for long maintenance-free use
• Hinged guard opens for infinite length sanding

JPW Industries - 1791293 - Product Categories

• Powermatic
• Sanders
• Horizontal-Vertical Edge Sanders

JPW Industries - 1791293 - Specifications

Brand Name	Powermatic (JPW Industries)
Manufacturer Part Number	1791293
Item Description	OES9138 Sander, 3HP 3PH 230/460V
Style (Type)	Horizontal/Vertical Oscillating Edge
Sanding Belt Size (L x W) (In.)	9 x 138-3/4
Belt Speed (FPM)	3542
Drum Diameter (In.)	4 Outboard, 9 Drive
Platen Size (In.)	9-1/2 x 48
Oscillations Per Minute	24
Main Table Size (L x W) (In.)	48 x 11-3/4
Main Table Tilt (Deg.)	5 In, 45 Out
Table Height from Floor (In.)	34-1/2 - 40-3/4
End Table Size (In.)	18
End Table Tilt (Deg.)	40 In, 45 Out
Electrical Controls	Magnetic Starter
Dust Collection Minimum CFM Required (CFM)	1,100
Dust Port Outside Diameter (In.)	4
Motor Power (HP)	3
Motor Phase	3
Motor Voltage (V.)	230/460
Prewired Voltage (V.)	230
Recommended Circuit Size (Amps.)	15/10
Height	0.0000
Length	0.0000
Weight	870.0000
Width	0.0000