JPW Industries 1000839 | Hydraulic Press Brake BP-9078NC

Our largest NC hydraulic press brake weighs 8,800 lbs. with a rigid steel frame. The encoder-controlled stroke and back gauge system offers 2 DROs and takes just 5 minutes to learn.

JPW Industries - 1000839 - Features

• Delivers up to 90 tons of pressure.
• Bends sheet metal up to 78” wide.
• 10 hp main motor runs on 220-volt 3-phase power.
• Powerful, Easy-to-Use Hydraulic System
• Runs in 3 modes : jog mode for setup, manual mode for more control over descent and return, and automatic mode for full production.
• 2 encoder-controlled hydraulic cylinders move the top beam.
• Digital readout (DRO) displays the position of the downward stroke, so you can fine-tune a bend and make it right every time.
• It takes a just few seconds to change the top beam pressure and the top position of the stroke (for more or less travel).
• You can set a timer for bend delay to hold the beam down at the bottom of the stroke, so the bend won't lose its shape.
• 2 hand wheels let you adjust the position of the beam and back gauge for consistency across the entire width of the beam.
• Foot pedal brings the stroke up and down, leaving your hands free to position the material.
• Motorized back gauge rides on a solid ball screw trolley mechanism.
• Back gauge encoder shows its position on its own DRO.
• Parallel mechanism on the beam synchronizes the top and bottom die to deliver better quality bends across the entire width of the machine.
• Rigid Structure and Low Maintenance
• Heavy electrowelded frame , made of solid steel, enables this press brake to stay accurate and run smoothly in production for many years.
• Upper beam rides on a hardened, stabilizing track , coupled together by 3 axes of bearings, to ensure high accuracy between both dies at any position of the stroke.
• Includes a set of hardened single-Vee American tooling.
• Accepts standard press brake tooling, giving you a wide variety of options.
• Comes with front material rests (or support arms), which some competing machines do not include.
• 6-light safety curtain helps protect you from injury. This guard stops the machine from running if your hand passes through the light beam.
• 4 grease zerks let you add oil every few months.
• Large hydraulic reservoir on the back allows for convenient fluid changes every 6 to 8 months.
• Fast Shipping and Lifetime Service
• Typically in stock and usually ships in 72 hours.
• Most replacement parts are in stock at our Wisconsin headquarters, so we can get them to you without delay.
• Comes covered by a 1-year parts warranty.
• We provide lifetime technical support by phone. All of our reps have hands-on machine experience. Call us whenever you need help and advice on a project.
• Recommended for: Industrial shops, maintenance shops, and R&D shops.

JPW Industries - 1000839 - Product Categories

• Baleigh Industrial
• Metal Forming
• Press Brakes

JPW Industries - 1000839 - Specifications

Brand Name	Baleigh (JPW Industries)
Manufacturer Part Number	1000839
Item Description	Hydraulic Press Brake BP-9078NC
Item Number	BP-9078NC
Back Gauge Length	17144
Return Speed	2.36" / sec.
Motor	10 hp
Oil Capacity	45 gal
Throat Depth	7.87"
Stroke Distance	5.9"
Table Width	6.29"
Approach Speed	3.14" / sec.
Back Gauge Motor	1/2 hp
Bed Length	17145
Bending Speed	.236" / sec
Maximum Capacity	90 tons
Distance Between Housings	61"
Distance From Table To Ram	11.81"
Power	220V / 3-phase
Shipping Weight	8800lbs
Shipping Dimensions (Inches)	103x85x100