JET Tools 101943 | 3-Ton Hand Chain Hoist with 30' Lift | S90-300-30

JET S90 Series Hand Chain Hoists were designed with all steel construction and ensure reliability and durability to perform in light-duty industrial applications. Easily maintained and serviced, the JET S90 is available in capacities from ½ ton to 10 ton and standard lifts of 10, 15, 20, and 30 feet (custom lifts available). The JET S90 is the ideal contractor grade hoist.

JET Tools - 101943 - Features

• Grade 80 black oxide coated load chain for added durability
• Heat Treated Load Plates
• Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
• Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
• Needle bearings support the load sheave to increase efficiency and promote smooth operation
• Secured with Allen screws and lock nuts, the cast-steel safety latches are more durable than stamped steel latches and will not bend out of compliance with lifting regulations
• The smaller body and lightweight design are ideal for confined areas and low headroom applications
• The Weston style double ratchet pawl brake design splits the load to opposite sides of the ratchet gear for greater load security and increased safety
• Full range capacity 1/2 ton to 10 tons
• Designed for years of trouble-free service
• All steel construction with a durable powder coat finish
• Lightweight, compact design for low headroom applications
• Needle bearing supported load sheave for smooth operation
• Completely enclosed Weston type automatic brake system for precise load spotting
• Triple-spur gears provide high efficiency ratio with minimum effort
• Induction hardened grade 80 load chain
• Drop forged hooks with heavy-duty safety latches swivel 360 degrees for easy rigging
• Smooth rolled edge on hand chain cover prevents side pull jamming
• Standard hand chain drop equals lift length
• Complies with OSHA, ANSI/ASME B30.16 and HST-2 standards
• Includes:
• SMH-3T-30, 3 Ton Capacity Hoist with 30-ft Lift - 101719

JET Tools - 101943 - Specifications

Brand Name	JET Tools
Manufacturer Part Number	101943
Item Description	3-Ton Hand Chain Hoist with 30' Lift | S90-300-30
Hand Chain To Lift Load 1 ft.	115
Capacity (Lbs.)	6600
Lift (Ft.)	30
Load Capacity (Tons)	3
Load Chain Dimensions dia/mm)	8 X 24
Model Number	S90-300-30
Prop 65	Cancer and Reproductive Harm
Weight (Lbs.)	128
Lbs. of Pull to Lift Capacity	87.0000
Headroom (In.)	20-1/2
Weight	103 lbs.
Capacity	3 Tons
Headroom	23-1/2-in
Important	Before installation read owner's manual for additional warnings and precautions. Not for use in an explosive environment
Load Chain (dia./mm)	7
Number of Falls	2
Pounds Pull to Lift Capacity	86 lbs.
Rated Capacity	6,614 lbs.
Required Hand Chain to Lift Load 1-foot	116-ft
Ship Weight	105 lbs.
Standard Lift	30-ft

JET Tools - 101943 - Documents and Downloads

JET Tools 101943 Specifications Sheet	Click to View
JET Tools 101943 Manual	Click to View