Graco Industrial 25M572 | ToughTek M680a CS System

If you are looking to spray fireproofing materials or other water-flush repair mortars in an electric-sensitive environment, the ToughTek M680a CS is the perfect fit. Switch to spraying repair mortars with this air powered system and start saving your business time and money.

Graco Industrial - 25M572 - Features

• If you are looking to spray fireproofing materials or other water-flush repair mortars in an electric-sensitive environment, the ToughTek M680a CS is the perfect fit. Switch to spraying repair mortars with this air powered system and start saving your business time and money.
• Portable sprayer for mortar, cementitious and heavily filled materials
• Primary features:
• Low pressure pumping (200 to 500 psi/13.7 to 34.5 bar) reduces wear on pump lower
• Less material waste and more consistent finish than hand-trowling
• Fast, easy cleaning with high velocity flush
• Can be quickly disassembled for hand cleaning
• Explosion-proof for hazardous spray areas
• One convenient air source to run pump and atomize air
• Flex Hose Applicator
• Best for heavily filled materials that easily pack out
• Includes Round Nozzle; provides a rough finish texture
• Simple design, easy to clean
• Order part number 24T947
• Pole Applicator
• For hard to reach areas
• Best for heavily filled materials that easily pack out
• Includes Round Nozzle; provides a rough finish texture
• Simple design, easy to clean
• Order part number 24T946
• HTX 680 Applicator
• Good for lighter materials that do not typically pack out
• Includes Round Pattern Nozzles; provides a medium round pattern texture finish
• Air mixed into fluid through multiple venturi ports provides a consistent pattern
• Gives a more controlled pattern for lightweight materials or high solids coatings
• Includes flat pattern discs - spreads the pattern out like a fan, giving a wider coverage area per pass
• Order part number 24U209
• Large Capacity Hopper
• 25 gal (95 L) hopper kit
• Ideal for materials that require more than 10 gal/38 liter capacity, such as fireproofing
• Boost productivity by minimizing refills
• Easily connects to ToughTek M680a
• Easy to connect and maneuver
• Order part number 24W889

Graco Industrial - 25M572 - Technical Specifications

Application	Mortar
Compatible Material	Cementitious Material
Fluid Section Type	2-Ball
Hopper Capacity (gal)	10
Material	Repair Mortar
Material Output (bags/hr)	40
Maximum Continuous Cycle Rate (CPM)	60
Maximum Flow Rate (GPM)	10.8
Maximum Hose Length (ft)	100
Maximum Operating Temperature (°F)	120
Maximum Working Pressure (MPa)	4.1
Maximum Working Pressure (psi)	600
Minimum Operating Temperature (°F)	32
Model	ToughTek
Portable	Portable
Series	M680a CS
Type	Pneumatic Piston Pump
Weight (lb)	250

Graco Industrial - 25M572 - Documents and Downloads

Graco Industrial 25M572 Product Brochure	Click to View
3A5275D, Manual, ToughTek M680a CS Mortar Sprayer, Operation, Repair, Parts, English	Click to View
332612C, ToughTek M680a Mortar Sprayer, Instructions-Parts, English	Click to View
332651A - Mortar Spraying Tips, English	Click to View
3J0395EN-A ToughTek M680 Flyer	Click to View
MSD201EN, Loctite 567 Low Strength Thread Sealant, Safety Data Sheet, English	Click to View