Graco Industrial 24Y575 | SaniForce 1040e Sanitary S/S EODD Pump with S/S Seats, PTFE O-Rings, PTFE Balls, 2-Piece PTFE Diaphragm & 1.5 in Sanitary Flange

The SaniForce 1040e combine all of the benefits of a traditional air operated diaphragm pump like self-priming, stalling under pressure and increased diaphragm life with the benefits of an electric pump like energy cost savings, reduced pulsation and increased pump control.

Graco Industrial - 24Y575 - Features

• The SaniForce 1040e combine all of the benefits of a traditional air operated diaphragm pump like self-priming, stalling under pressure and increased diaphragm life with the benefits of an electric pump like energy cost savings, reduced pulsation and increased pump control.
• 1 inch (25.4 mm) air-operated double diaphragm sanitary pump with flow rates up to 40 gpm (151 lpm) - ideal for food-related applications
• Low pulsation makes this pump ideal for applications that need smooth flow 5 times more efficient than an air operated diaphragm pump
• Patent pending technology allows pump to stall under pressure preventing pump failures from clogged lines or closed valves
• Energy efficient electric drive reduces energy consumption up to 5x compared to traditional air operated diaphragm pumps
• Less Noise disturbance thru less than 70 dBa compared to an AODD
• Mobile cart options available for easy and quick movement
• Seal-less diaphragm pump design eliminates leaking and failures due to run-dry pump conditions

Graco Industrial - 24Y575 - Technical Specifications

Air Inlet Size (in)	3/8"
Air Inlet Thread Gender	Female
Air Inlet Thread Type	NPT
Application	Sanitary
Ball Material	PTFE
Center Section Material	Aluminum
Compatible Material	Food, Personal Care
Connection Type	Tri-Clamp
Diaphragm Compatible Material	PTFE
Diaphragm Material	PTFE/EPDM 2-Piece
Fluid Inlet Size (in)	1-1/2"
Fluid Outlet Size (in)	1-1/2"
Fluid Section Material	Stainless Steel
Manifold Configuration	End Port
Manifold O-Ring Material	PTFE
Material	Stainless Steel
Maximum Air Pressure (MPa)	0.55
Maximum Air Pressure (psi)	80
Maximum Cycle Rate (CPM)	280
Maximum Flow Rate (GPM)	35
Maximum Fluid Pressure (MPa)	0.48
Maximum Fluid Pressure (psi)	70
Maximum Motor Speed (RPM)	1800
Maximum Operating Temperature (°F)	104
Maximum Solid Size (in)	0.125
Maximum Storage Temperature (°F)	104
Minimum Operating Temperature (°F)	32
Minimum Storage Temperature (°F)	32
Model	SaniForce
Motor Type	AC
Power Rating (HP)	2
Power Source	Electric
Seat Material	Stainless Steel
Series	1040e
Standards Met	CE
Type	Electric Diaphragm Pump
Voltage (V ac)	460

Graco Industrial - 24Y575 - Documents and Downloads

3A3167S, SaniForce 1040e Electric-Operated Diaphragm Pump, Operation, English	Click to View
MSD201EN, Loctite 567 Low Strength Thread Sealant, Safety Data Sheet, English	Click to View