EverCoat 16192Z | 440 Express Micro Pinhole Eliminator

A quick fix for micro-pinholes that are hard to identify

EverCoat - 16192Z - Product Categories

• Auto Body
• Body Fillers, Spreaders and Accessories

EverCoat -16192Z - Overview

• A quick fix for micro-pinholes that are hard to identify prior to primer application.
• Eliminates micro-pinholes in putty
• Eliminates stray sand scratches
• No Sanding required
• This 1K patent-pending technology is a high-solids polyester that is easy to apply and quick to dry. Testing has shown, when used properly, 440Express will eliminate up to 90% of all rework caused by micro-pinholes.

EverCoat - 16192Z - Package Contents

• (1) 4oz bottle
• (2) Applicator handles
• (12) Applicators

EverCoat - 16192Z - Safety Information

• Be sure to read and fully understand the instruction and safety warnings on this product prior to use. Always wear proper safety equipment when using this type of product.
• 440Express Micro-Pinhole Eliminator is a quick fix for micro-pinholes that are hard to identify prior to primer application. This 1K patent-pending technology is a high-solids polyester that is easy to apply and quick to dry. Testing has shown, when used properly, will eliminate up to 90% of all rework caused by micro-pinholes.
• Approved Substrates:
• The following cured and sanded products: Evercoat 2K Putties, Evercoat Premium Fillers, Evercoat Quantum1 10:1 Products Cured, and Sanded 2K Primer Surfacers. (When applying over a sanded 2K surfacer area must be re-primed and sanded or sealed before applying base coat)
• Preparation:
• 1. Finish sand the repair with 180-grit or finer sandpaper.
• 2. Remove dust with compressed air.
• Application:
• 1. Shake 440Express and apply a small amount on the applicator sponge or the repair area.
• 2. Wipe 440Express over the entire repair area. Multiple applications may be necessary on larger repair areas.
• 3. Continue to wipe until a light coat of 440Express has been applied. When applied properly, the repair area will still be visible through the light coat.
• 4. Allow to dry 15 minutes and apply a primer surfacer according to paint manufacturer’s recommendations.
• If excess material builds up on the repair area, allow to dry 15-20 minutes, then lightly sand with 320 grit or finer sandpaper to remove any excess product prior to applying primer.
• NOTE: When using waterborne primers, allow to dry for 15-20 minutes. Finish by sanding with 320 or finer sandpaper, then follow your waterborne coating manufacturers’ recommendations.

EverCoat - 16192Z - General Specifications

Brand Name	EverCoat
Manufacturer Part Number	16192Z
Item Description	440 Express Micro Pinhole Eliminator
Net Weight	1.0
Height	6
Width	6
Depth	6

EverCoat - 16192Z - Warranty

Warranty

One Year Shelf Life