Application: RPO Code L82/L84/L87/LV3/LSYThe CH-47976 Afit (Active Fuel Injector Tester) is a previously essential Tool that can quickly and thoroughly diagnose and Pinpoint the source of a vehicle Driveability issue and avoid unnecessary replacement of Fuel System components, especially Injectors that are not the actual cause of the problem. CH-47976-515 is a Universal Cable that was designed to avoid completely new Cables being required when ECM Controller Connector changes or Connector Pin location changes occur in new vehicles. One End of the CH-47976-515 Universal Cable Plugs into the Afit Sidi DMU. The DMU Plugs into the Afit MCU (Main Control Unit).Any new Cable Adapters required will Plug into the other End of the Universal Cable. The CH-47976-516 G7 Adapter and CH-47976-517 G8 Adapter are the first Adapters to be used with the CH-47976-515 Universal Cable for Engine diagnostics using the CH-47976 Afit due to 2019 vehicle Controller changes. The appliCable RPOs and (Engine Controllers) for 2019 are L82/L84/L87 (E90), LV3 (E93), and LSY (E01).
Other Kent Moore products
| J-42628 - Plate | Click to View |
| J-44378 - Press Adapter | Click to View |
| J-45867 - Ouput Shaft Seal Install (4Wd) | Click to View |
| EN-49982-2 - Wedge Assy-Timing Chain Retainer | Click to View |
| J-43765-3 - Press Tube | Click to View |
| DT-50851 - Front-Housing-Expansion-Plug-Installer | Click to View |
| EN-46335-A - Valve Spring Compressor | Click to View |
| J-39439-1 - Bushing Remover | Click to View |
| J-39439-4 - Bushing Installer | Click to View |
| J-44731 - Input Shaft Seal Installer | Click to View |
