DT-51628 is a two piece Tool design. This Tool serves two purposes,1. Serving as a Device to sandwhich and Retain the C2 hub inSide the Clutch Support when it is Loaded into the motor Assembly. 2. Used as a Holding Tool when torquing the C2 Clutch Housing fasteners to the motor Assembly. The first component of this Tool is a spLined Shaft which includes a 3/8" female square Drive feature that is incorporated at one End and a Threaded Hole located at the oposite End. The second component of the Tool is a knurled Adapter that Threads into the Shaft. The C2 Clutch is built upSide down and when flipped to the up position the components will fall apart. The Adapter Threaded into the spLined Shaft will Retain the components and keep the C2 Clutch components intact upon Installation into the motor. Additionally, the spLined Shaft with the assist of a 3/8" ratchet is used to keep the Assembly from turning so that the C2 Clutch fasterners can be properly Torqued to the motor Assembly.
Kent Moore Tools - DT-51628 - Product Categories
- Automotive Specialty Tools
- Drive Train- Transmission
- Clutch Service Tools
Kent Moore Tools - DT-51628 - Features
- DT-51628 is a two piece tool design.This tool serves two purposes,1. Serving as a device to sandwich and retain the C2 hub inside the clutch support when it is loaded into the motor assembly. 2. Used as a holding tool when torquing the C2 clutch housing fasteners to the motor assembly. The first component of this tool is a splined shaft which includes a 3/8" female square drive feature that is incorporated at one end and a threaded hole located at the opposite end. The second component of the tool is a knurled adapter that threads into the shaft. The C2 Clutch is built upside down and when flipped to the up position the components will fall apart. The adapter threaded into the splined shaft will retain the components and keep the C2 Clutch components intact upon installation into the motor. Additionally, the splined shaft with the assist of a 3/8" ratchet is used to keep the assembly from turning so that the C2 clutch fasteners can be properly torqued to the motor assembly.
Kent-Moore Tools - DT-51628 - Specifications
| Brand Name | Kent-Moore Tools |
| Manufacturer Part Number | DT-51628 |
| Item Description | C2 Clutch Assembly Holder |
Kent Moore Tools - DT-51628 - Partial List of Applications
| Automatic Transmission - 5ET50 (MKE) : Transmission : Malibu | 2016, 2017 |
| Automatic Transmission - 5ET50 (MKV) : Transmission : Volt | 2016, 2017 |
Kent Moore Tools - DT-51628 - Other Kent Moore products
| J-44247 - Wiring Harness Connector Installer | Click to View |
| DT-52761 - Installer, Output/Pinion Seal | Click to View |
| DT-50315 - Hardware kit, Remover | Click to View |
| EN-51454 - Connecting Rod Guide Set | Click to View |
| GE-50385-1 - Adapter | Click to View |
| J-43966-1 - Connecting Rod Pin | Click to View |
| J-46630 - Lube Dam Installer | Click to View |
| J-8001-1 - Dial Indicator Clamp | Click to View |
| KM-906-14 - Adapter, Bushing Replacer, Front Cradle | Click to View |
| DT-52429 - Torque Converter Fluid Seal Installer | Click to View |
