Kent Moore EN-48974-30 | Adapters, Egr Cooler Tester

Applications: W-Series MD truck, Isuzu MD trucks with 5.2L 4HK1 diesel Engines (2010-I – current)EN-48974-30 EGR Cooler Pressure Tester Adapter (1" Hose) is used along with J-46091-1 Pressure Regulator Assembly to Test the EGR cooler for Leaks between the coolant Side and the exhaust Side. The cooling System is drained, and the Hoses removed from the EGR cooler inlet and outlet. The Pressure Adapter from EN-48974-30 is attached to the EGR cooler on either the inlet or outlet, and the other End is Plugged using the supplied cap. with the Regulator completely open, J-46091-1 is attached to shop Air, and the Regulator gradually turned until 15 psi is reached. The Valve on J-46091-1 is closed, and the System is Left. Pressure should be Maintained for at least 15 miNutes, with minimal Pressure drop. Any significant Pressure drop indicates the EGR cooler is Leaking.  J-46091-1 is included in J-46091.EN-48974-30 includes EN-48974-31 (1” Adapter), EN-48974-32 (1” cap) and non-marRing Hose Clamps to fit 1” Hose connections.

Other Kent Moore products

EN-51151 - Crank Shaft Rear Oil Seal Installer	Click to View
DT-47928-2 - Bearing Installer Tool Set – Base	Click to View
DT-52017 - Vent Hose Pipe Installer	Click to View
EL-50334-6 - Audio System Diagnostic Cd	Click to View
J-2222-C - Wheel Bearing Nut Wrench	Click to View
J-45126-2 - Replacement Tips, Snap Ring Pliers, Straight	Click to View
J-9522-3 - U Joint Bearing Separator	Click to View
KM-422 - Installer	Click to View
KM-453 - Installer	Click to View
J-45275 - Air Line Release Tool	Click to View