Application: 8L45 TransmissionDT-50905-3 is an Adapter for the DT-50905 Clutch Air Travel Arbor Fixture. DT-50905-3 fits over the DT-50905 Base and Seals on the Base O-Rings. The 13567 Clutch Pack is Set onto DT-50905-3 and the Assembly is placed in the counter Bore on the bottom Plate of the 8L45/8L90 DT-50900 Clutch Travel Support Fixture. The DT-50900 Forcing Screw is turned until the DT-50903 Load Gauge reads the proper Load for the Clutch Pack Assembly. This flattens the Pack Assembly and forces out any Air trapped between the discs and backing Plates. The J-8001 Dial Indicator is attached to the Clutch hub and the Indicator plunger is positioned on the Clutch Pack and Set to zero. Air at shop Pressure is then fed into a port in the DT-50905 Base. The Travel dimension shown on the Dial Indicator is checked and compared to the SI specification. The proper thickness of selective Retaining Ring is then Installed into the Clutch hub to Retain the Pack disc Assembly.Used with J-8001 Dial Indicator, DT-50903 Load Gauge and DT-50900 Clutch Travel Support Fixture. The DT-50905-3 Adapter is not included with the DT-50905 Arbor Fixture or the DT-50900 Clutch Travel Support Fixture.
Other Kent Moore products
| DT-52089 - Wiring Harness Connector Remover | Click to View |
| EN-51246 - Engine Lift Bracket | Click to View |
| J-45187 - Differential Output Shaft Oil Seal Installer | Click to View |
| J-46620-2 - Pusher | Click to View |
| EL-49741 - Harness, Transfer Case Encoder Motor Indexing | Click to View |
| EN-49756-1 - Spacer | Click to View |
| J-45268-9 - Plug, Flusher (Qty1) | Click to View |
| KM-6624 - Remover | Click to View |
| DT-49112 - Sat Anti Rotating Wedge | Click to View |
| EN-46091-25 - Diesel Engine Pressure Test Adapter | Click to View |
