Kent-Moore CH-51725 | Wheel Hub and Bearing Replacer
Application: 2015-Current Chevrolet SparkDue to the off-Set mounting of the Control Armattachment points on the Knuckle, previously used Bearing Replacers will not fit Spark wheel Bearings and hubs. The hub and Bearing should not be Driven out, in order to prevent damage to the Bearing, and they must be removed by the Outer Bearing shell only. CH-51725 includes a forcing Bridge with off-Set mounts to attach to the Knuckle, and the required Drivers to remove both the wheel hub and the wheel Bearings, as well as to Install the wheel Bearing into the Knuckle and the hub into the wheel Bearing. Unapproved methods will damage the Bearing.
Partial List of Applications
| Front Suspension : Suspension : Spark | 2016, 2017 |
Other Kent Moore products
| CH-52078 - Coil Spring Compressor | Click to View |
| J-42168-11 - Pilot | Click to View |
| EL-50812 - Plugs, Battery Leak Test | Click to View |
| J-43776 - C2 Piston Ring Compressor | Click to View |
| J-38792-VS - Vibration Damper Installer | Click to View |
| J-45101 - Set, Dial Indicator | Click to View |
| J-4254-6 - Torque Wrench | Click to View |
| GE-52650 - Premium Refrigerant Leak Detector | Click to View |
| DT-50900 - Variable Load Tool & Clutch Travel | Click to View |
| J-45130 - Input Shaft Seal Installer Set | Click to View |
