Kent Moore Tools EN-51577 | Balancer Holder/Remover
On AWD models, the PTU must be removed to access the starter, which must be removed to Install the Flywheel Holder, required for balancer Removal and Installation. Removing the PTU adds a minimum of 2.9 hours to the time required for replacing a Front Crank Shaft Seal. EN-51577 allows the PTU and starter to reMain in place for AWD vehicles to avoid this additional labor time. EN-51577 engages into the slots on the balancer, and holds the balancer as the Bolt is removed or Torqued. Once the Bolt is removed, existing Crank Shaft Protector J-38416-2 is Installed, along with the Remover Adapter of EN-51577. The Remover forcing screw is tightened against J-38416-2 to remove the balancer.
Kent Moore Tools - EN-51577 - Product Categories
- Automotive Specialty Tools
- Removal & Installation
Kent Moore Tools - EN-51577 - Features
- Used on 2.0L and 2.5L
- Shop hard to find auto parts, high-end electrician tools, specialty auto-shop supplies and forestry tools at affordable pricing with FREE Selected Shipping. We specialize in auto, aviation, boat & motorcycle, serving the institutions of military, government, emergency response & education for over 50 years. Find vehicle-specific tools, as well as DIY, boutique hand tools, specialty motorcycle tools to get the job done right.
Kent-Moore Tools - EN-51577 - Specifications
| Brand Name | Kent-Moore Tools |
| Manufacturer Part Number | EN-51577 |
| Item Description | Balancer Holder/Remover |
Kent Moore Tools - EN-51577 - Partial List of Applications
| Engine Mechanical - 2.0L (LTG) or 2.5L (LCV) : Engine/Propulsion : ATS | 2016, 2017 |
| Engine Mechanical - 2.0L (LTG) or 2.5L (LCV) : Engine/Propulsion : Envision | 2017 |
| Engine Mechanical - 2.0L (LTG) : Engine/Propulsion : Camaro | 2016, 2017 |
| Engine Mechanical - 2.0L (LTG) : Engine/Propulsion : CT6 | 2016, 2017 |
| Engine Mechanical - 2.0L (LTG) : Engine/Propulsion : CTS | 2016, 2017 |
| Engine Mechanical - 2.0L (LTG) : Engine/Propulsion : Envision | 2016 |
| Engine Mechanical - 2.0L (LTG) : Engine/Propulsion : Malibu | 2016, 2017 |
| Engine Mechanical - 2.0L (LTG) : Engine/Propulsion : Regal | 2016, 2017 |
| Engine Mechanical - 2.5L (LCV) : Engine/Propulsion : Acadia | 2017 |
| Engine Mechanical - 2.5L (LCV) : Engine/Propulsion : Canyon | 2016, 2017 |
| Engine Mechanical - 2.5L (LCV) : Engine/Propulsion : Colorado | 2016, 2017 |
| Engine Mechanical - 2.5L (LCV) : Engine/Propulsion : Impala | 2016, 2017 |
| Engine Mechanical - 2.5L (LCV) : Engine/Propulsion : Malibu Limited | 2016 |
Kent Moore Tools - EN-51577 - Other Kent Moore products
| J-42743 - Trim Height Adjustment Tool | Click to View |
| J-45873-100 - Fuel Volume Test Kit | Click to View |
| J-44530 - C3 & C4 Piston Spring Compressor | Click to View |
| J-44721-20 - Power Steering Analyzer Adapters | Click to View |
| J-45747 - Fuel Lock Ring Wrench | Click to View |
| J-45934 - Input Shaft Seal Installer | Click to View |
| EN-52449 - Engine Stand Adapter | Click to View |
| J-45236 - Output Shaft Seal Installer - Front | Click to View |
| J-45405-15 - Scraper | Click to View |
| KM-6037 - Adapter | Click to View |
