Kent Moore Tools DT-51336 | Bearing Installer
DT-51336 is a double-Ended Tool (3 function) used to Install the Front Output Shaft Front Ball Bearing into the Transfer case Front Housing, Install a needle type Bearing into the Drive Sprocket, and Install the Front Output Shaft Rear Bearing into the Rear Housing. The Front Output Shaft Front Ball Bearing is Installed until bottomed in the case half Bore. The Drive Sprocket needle Bearing must be Installed to a specific depth in the Sprocket. The Front Output Shaft Rear needle Bearing is Installed to a specific depth. Current GM Tools will not fit either Bearing, and the Drive Sprocket Bearing position is critical to the operation of the Drive chain and Sprocket.
Kent Moore Tools - DT-51336 - Features
- DT-51336 is a double-ended tool (3 function) used to install the front output shaft front ball bearing into the transfer case front housing, install a needle type bearing into the drive sprocket, and install the front output shaft rear bearing into the rear housing. The front output shaft front ball bearing is installed until bottomed in the case half bore. The drive sprocket needle bearing must be installed to a specific depth in the sprocket. The front output shaft rear needle bearing is installed to a specific depth. Current GM tools will not fit either bearing, and the drive sprocket bearing position is critical to the operation of the drive chain and sprocket.
Kent-Moore Tools - DT-51336 - Specifications
| Brand Name | Kent-Moore Tools |
| Manufacturer Part Number | DT-51336 |
| Item Description | Bearing Installer |
Kent Moore Tools - DT-51336 - Partial List of Applications
| Transfer Case - MP 1622G (NQ7) : Transmission : Canyon | 2016, 2017 |
| Transfer Case - MP 1622G (NQ7) : Transmission : Colorado | 2016, 2017 |
| Transfer Case - MP 3025G (NQ6) : Transmission : Canyon | 2016, 2017 |
| Transfer Case - MP 3025G (NQ6) : Transmission : Colorado | 2016, 2017 |
| Transfer Case : Transmission : Canyon | 2015 |
| Transfer Case : Transmission : Colorado | 2015 |
Kent Moore Tools - DT-51336 - Other Kent Moore products
| EN-51104 - Fuel Injector Pump Holder | Click to View |
| J-44375 - Assembly Pallet F23 Trans | Click to View |
| CH-47976-516 - G7 Afit Adapter | Click to View |
| J-44764 - Overdrive & Intermediate Clutch Spring Compressor | Click to View |
| J-45124 - Removal Bridge | Click to View |
| J-45136 - Center Support Outer Piston Protector | Click to View |
| J-45184 - Installer | Click to View |
| J-45766 - Remover, Differential Side Bearing (To Adj.) | Click to View |
| KM-507-C - Ball Joint Remover | Click to View |
| KM-554 - Installer | Click to View |
