Kent Moore Tools DT-49907 | Installer, Bearing & Cup

DT-49907 is a double-Sided Tool, used to Install the Side Bearing onto the Differential case on 218 mm Ring Gear RDMs, and to Install the Inner Pinion Bearing cup into the RDM Housing on 195 mm Ring Gear models. Both Sides are used with previously Essential J-8092 Driver Handle to seat the Bearing or cup. The Side Bearing is centered over the Differential case trunion as it Installed, and the cup must be Installed without any contact to the Bearing surface.

Kent Moore Tools - DT-49907 - Features

• DT-49907 is a double-sided tool, used to install the side bearing onto the differential case on 218 mm ring gear RDMs, and to install the inner pinion bearing cup into the RDM housing on 195 mm ring gear models. Both sides are used with previously Essential J-8092 Driver Handle to seat the bearing or cup. The side bearing is centered over the differential case trunion as it installed, and the cup must be installed without any contact to the bearing surface.

Kent-Moore Tools - DT-49907 - Specifications

Brand Name	Kent-Moore Tools
Manufacturer Part Number	DT-49907
Item Description	Installer, Bearing & Cup

Kent Moore Tools - DT-49907 - Partial List of Applications

Driveline /Axle : Driveline /Axle : Camaro	2011
Rear Drive Axle : Driveline /Axle : Camaro	2013, 2014

Kent Moore Tools - DT-49907 - Other Kent Moore products

DT-49909 - Axle Housing Spreader Adapters	Click to View
DT-49938 - Differential Assembly Rotator	Click to View
DT-49954 - Seal Installer, PTU Output Shaft	Click to View
DT-50117 - Seal Protector and Retaining Clips	Click to View
DT-50199 - Installer, Bushing & Seal	Click to View
DT-50302-A - Drive Motor Rotor Lifting Tool	Click to View
DT-50573 - Retaining Ring Installer	Click to View
DT-50649 - Front Output Shaft Seal Installer	Click to View
DT-50839 - Transmission Adapter Plate Bushing Replacer	Click to View
DT-50840 - Input Shaft Seal Installer	Click to View