Price match guarantee
We know our products
Quick & Hassle Free
Extensive product catalog
DT-48007 holds the Drive Pinion in order to service the Pinion Retaining Nut on the Pinion cartridge Assembly. DT-48007 is secured in a vise. The Pinion cartridge Assembly is placed onto DT-48007. The Pinion Nut can then be removed or Installed and Torqued using J-42172 Pinion Nut Wrench. Due to the high Load required to break loose or fully seat the Nut (approximately 500 N-m/370 lb-ft) the Pinion cannot be allowed to turn. DT-48007 also has a square Drive, to hold the Pinion in order check back lash. Failure to use DT-48007 will result in damage to the Pinion teeth, resulting in the unnecessary replacement of the Ring ang Pinion Gear Set.
