Kent-Moore J3954419A | Torq Socket 7/8-140FT/Lb
Kent-Moore J3954419A | Torq Socket 7/8-140FT/Lb
Accept Credit Cards
Official PayPal Seal

Kent-Moore J3954419A | Torq Socket 7/8-140FT/Lb
Availability: In Stock
Part Number: KMJ3954419A
0 Review(s)
Write a Review
Retail Price:$82.85
Your Savings:$4.08(5%)
  • Low prices.

    Price match guarantee

  • In-House Experts.

    We know our products

  • Easy Returns.

    Quick & Hassle Free

  • Superior Selection.

    Extensive product catalog

7/8" x 140 ft. lb. (turquoise) C/K Dual Rear Wheel Truck, 10/15-20/25-30/35 Single Rear Wheel Truck These Universal Torque Sockets are one piece, 1/2" Drive wheel Nut Sockets designed for use with an impact Wrench (250 ft. lb. Max.) Simply attach the appropriate Socket to your impact Wrench and tighten the Nuts in the proper sequence. Once the proper Torque is reached the Socket will absorb the excess Torque. The Sockets provide consistent Torque to all wheel Nuts which is important in avoiding Brake pulsation or wheel vibration. IMPORTANT INFO: 1) When you notice the impact has stopped Rotating you should let up on the impact. Continuing to Wrench after the Torque spec is reached will not over-tighten the wheel Nut, but can lead to premature failure of the Socket. 2) Regulate Air Line Pressure to 90-100 psi. 3) Do not use Sockets with a breaker Bar 4) Do not hold the Socket during use. 5) Do not use Sockets to remove wheel Nuts. 6) This pRoduct is a perishable item and will wear due to extEnded use. This is not an indication of poor quality but is more related to the unique design and application of the pRoduct. Also, excessive Line Pressure, overTorqueing or other Tool misuse may lead to Tool breakage. For these reasons J-39544 Torque Sockets are not covered under the Kent-Moore Lifetime warranty. A 1 year warranty applies.

Kent-Moore J3954419A | Torq Socket 7/8-140FT/Lb


Order Part NumberKMJ3954419A
Item DescTORQ SOCKET 7/8-140FT/LB
Product Group IdKM00
Country of OriginTW
Harmonization Code82022000
Bin CodeEP126

Other Kent Moore Products

J39549 - Ball Joint SeparatorClick to View
J39570 - Wind Noise Electronic Listening Chassis EarClick to View
J39579 - Cam Shaft Gear HolderClick to View
J39580 - Automatic Transaxle Engine Support TableClick to View
J39601 - Camber/Caster AdjusterClick to View
J39637A - Drive Linkage Wiper Arm PullerClick to View
J39648 - Drive Sprocket Seal InstallerClick to View
J39730 - Rear Caliber Piston RetractorClick to View
J39758 - Front Chassis King Pin Pivot Holding ToolClick to View
J39765 - Engine Control Fuel Sender Llock Nut WrenchClick to View

Related Items

Recently Viewed Items