Electronic Specialties Inc 180 | Loadpro Dynamic Test Leads 60 Long
Electronic Specialties Inc 180 | Loadpro Dynamic Test Leads 60 Long
Accept Credit Cards
Official PayPal Seal

Electronic Specialties Inc 180 | Loadpro Dynamic Test Leads 60 Long

https://www.autotoolworld.com/assets/images/Electronic Specialties Inc_150px.jpg
Availability: In Stock
Part Number: ES180
0 Review(s)
Write a Review
$50.05
Retail Price:$60.06
Your Savings:$10.01(17%)
product-shipping
  • Low prices.

    Price match guarantee

  • In-House Experts.

    We know our products

  • Easy Returns.

    Quick & Hassle Free

  • Superior Selection.

    Extensive product catalog

Electronic Specialties Inc 180 | Loadpro Dynamic Test Leads 60 Long

LOADpro performs voltage drop test with the push of a button. On a 12 Volt system, pressing the switch applies a load of approximately .5 Amps across the circuit. This simple test finds problems in corroded wires/connections and shorts to ground. Watch our video and you?ll spend less time diagnosing wiring problems. Start doing voltage drops now! Diagnose faster and earn more $$$. Works with your existing DMM.

  • Dynamic Test Lead
  • Electrical Rating 12 Volt, 0.5 Amp
  • Length 60 Inch
  • Application Automotive, Heavy Duty, Marine, RV, Equipment
  • Applicable Standard OEM



  • https://www.autotoolworld.com/assets/icons/features.jpg

    Electronic Specialties Inc - 180 - Features

    • High Corrosive Resistance
    • Shorts to ground
    • Open Circuit
    • LOADpro performs voltage drop test with the push of a button
    • On a 12 Volt system, pressing the switch applies a load of approximately 0.5 Amps across the circuit. This simple test finds problems in corroded wires/connections and shorts to ground
    • Finds the problems like high corrosive resistance, shorts to ground, open circuits quickly
    • By loading the circuit, LOADpro makes a voltage drop test "on the fly", just press the switch and the test results can not lie
    • This is the only OEM/manufacturer approved tool that can locate corrosion in wiring with a digital voltmeter
    • LOADpro test leads work with almost any digital multimeter
    • Also features steadypin probe tips, instead of a pointed probe
    • 60in. Test Leads



    https://www.autotoolworld.com/assets/icons/overview.jpg

    Electronic Specialties Inc - 180 - Overview

    • LOADpro finds these problems FAST
    • High Corrosive Resistance
    • Shorts to Ground
    • Open Circuits
    • LOADpro Test Leads load the circuit to see if current can flow.
    • By loading the circuit, LOADpro makes a voltage drop test "on the fly".
    • Just press the switch – the test results can not lie.
    • Use LOADpro w/your DMM and follow our test method - you will find wiring faults quicker.
    • LOADpro Test Leads feature SteadyPin Probe Tips, which allows the probe to sit firmly on a male ECM or connector pin.
    • LOADpro are OEM approved – finds corroded circuits fast!
    • The process is very simple - just read voltage. It’s that easy, really. If a vehicle component is inoperable, just unplug the connector. Read voltage at the connector. Do you see 12 volts? If yes, press the LOADpro switch – if the voltage remains, the wiring is good – go on to something else. If the voltage drops – the circuit has high resistance… i.e.- corroded wiring or connections. If you see no voltage initially, you have an open or short to ground.
    • LOADpro Test Leads also feature SteadyPin Probe Tips. Instead of a pointed probe, SteadyPin tips have a small recess at the tip that allows the probe to sit firmly on a male ECM or connector pin. Traditional pointed probes fail to give an effective connection and creates difficulties in completing manufacturer specific voltmeter tests.
    • We recommend replacing your existing test leads with LOADpro and leave them in place.
    • NOTE - LOADpro Dymanic Test Leads and the 200 page book "Fundamental Electrical Troubleshooting" are available in a bundle. See part
    • 181
    • for this combination.



    https://www.autotoolworld.com/assets/icons/specs.jpg

    Electronic Specialties Inc - 180 - Specifications

    Order Part NumberES180
    Item DescriptionLoadpro Dynamic Test Leads 60 Long
    Manufacturer Long NameElectronic Specialties, Inc.
    Manufacturer Part Number180
    Product Group IdES00
    Country of OriginCN
    Harmonization Code90309088
    Default Selling UnitEA
    UNSPSC41111905



    https://www.autotoolworld.com/assets/icons/video.jpg

    Electronic Specialties Inc - 180 - Videos

    Electronic Specialties Inc 180 Video URLClick to View



    https://www.autotoolworld.com/assets/icons/pdf.jpg

    Electronic Specialties Inc - 180 - Documents and Downloads

    Electronic Specialties Inc 180 Catalog PagesClick to View
    Electronic Specialties Inc 180 Other Document 1Click to View

    Recently Viewed Items